MAX11068GUU/V+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 38-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 38 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.0959W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 30V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX11068 |
| Function | Battery Monitor |
| Output Voltage | 3.4V |
| Operating Supply Voltage | 70V |
| Power Supplies | 18/60V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | I2C |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 2mA |
| Supply Current-Max (Isup) | 9.6mA |
| Fault Protection | Over Temperature, Over/Under Voltage |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 12 |
| Height Seated (Max) | 1.1mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX11068GUU/V+ Overview
It is appropriate for the 38-TFSOP (0.173, 4.40mm Width) package. This system battery uses an analog integrated circuit (IC) called ANALOG CIRCUIT. 38 pins are attached to it. A Tube case holds it. Surface Mount is the mount number for this electronic part. This electrical component is from the Power Management Circuits family. This electronic component is mounted in the way of Surface Mount. It can provide functions of type Battery Monitor. Optimal performance of the electric part depends on operating temperature at -40°C~105°C TA. Chemistries for this electrical part are Multi-Chemistry. There is a 18/60V volt power source. It is always recommended that this battery protection IC is set to 30V. This is a family based on MAX11068. The Vsup (supply voltage) must be greater than 6V. A maximum current supply (Isup) of 9.6mA is permitted. The operating supply voltage for this power management IC is specified as 70V. A power IC's series number is Automotive, AEC-Q100. It operates on a supply current of 2mA volts.
MAX11068GUU/V+ Features
Available in 38-TFSOP (0.173, 4.40mm Width) Package
with 38 Pins
Mounting Type: Surface Mount
Battery Chemistry : Multi-Chemistry
operate supply voltage at the range of 30V
Output Voltage at the range of 3.4V
MAX11068GUU/V+ Applications
There are a lot of Maxim Integrated MAX11068GUU/V+ Battery Management ICs applications.
- Multicopter and drones
- Motor drive - single phase AC100V-240V non -isolated
- Power supplies
- UAV
- TFT cluster
- Chargers 50 kW to 350 kW
- Tower communications
- xEV charging station (off-board charger)
- Rear light with animation
- Power tools
