MAX11102AUB+

12 Bit 0.5mm ADC MAX11102 3V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX11102AUB+
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad
Datasheet: PDF
Stock: 354
Description: 12 Bit 0.5mm ADC MAX11102 3V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins	10
Operating Temperature	-40°C~125°C
Packaging	Tube
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Analog to Digital Converters
Max Power Dissipation	707.3mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX11102
Pin Count	10
Polarity	Unipolar
Configuration	MUX-S/H-ADC
Number of Channels	2
Interface	SPI, Serial
Max Supply Voltage	3.6V
Min Supply Voltage	2.2V
Number of Bits	12
Input Type	Single Ended
Architecture	SAR
Converter Type	ADC, SUCCESSIVE APPROXIMATION
Supply Type	Analog, Digital
Reference Type	External
Data Interface	SPI
Resolution	1.5 B
Sampling Rate	2 Msps
Voltage - Supply, Analog	2.2V~3.6V
Voltage - Supply, Digital	2.2V~3.6V
Number of Analog In Channels	2
Sampling Rate (Per Second)	2M
Output Bit Code	BINARY
Sample and Hold / Track and Hold	SAMPLE
Number of A/D Converters	1
Conversion Rate	2 Msps
Ratio - S/H:ADC	1:1
Analog Input Voltage-Max	3.65V
Signal to Noise Ratio (SNR)	73 dB
Length	3mm
Width	3mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant

MAX11102AUB+ Overview

The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 10 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 2 channels.The is equipped with 10 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 2M Hz.The input type of this electronic AD converter is Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 10 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.2V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MAX11102 family.Supply types can be categorized by Analog, Digital.The supply/digital voltage of this electrical AD converter is 2.2V~3.6V.ADC converters can be mounted using Surface Mount.The ADC converter operates with the maximal supply voltage of 3.6V.It operates with the minimal supply voltage of 2.2V.The maximal analog input voltage of this electrical AD converter is 3.65V. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 707.3mW.The number of channels is growing strong/weak: 2.The conversion rate of this electrical AD converter is calculated as 2 Msps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller.