MAX11167ETC+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFDFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 1.349W |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX11167 |
| Qualification Status | Not Qualified |
| Polarity | Bipolar |
| Power Supplies | 5V |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Interface | SPI, Serial |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation | 38mW |
| Number of Bits | 16 |
| Input Type | Pseudo-Differential |
| Architecture | SAR |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Analog, Digital, Single |
| Reference Type | Internal |
| Data Interface | SPI, DSP |
| Resolution | 2 B |
| Sampling Rate | 250 ksps |
| Voltage - Supply, Analog | 5V |
| Voltage - Supply, Digital | 2.3V~5V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 250k |
| Output Bit Code | BINARY |
| Integral Nonlinearity (INL) | 2 LSB |
| Sample and Hold / Track and Hold | TRACK |
| Conversion Rate | 250 ksps |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 5.0048V |
| Signal to Noise Ratio (SNR) | 92.6 dB |
| Differential Nonlinearity | 0.5 LSB |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX11167ETC+T Overview
The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 12-WFDFN Exposed Pad package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 12 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 250k Hz.The input type of this electronic AD converter is Pseudo-Differential.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.There are 12 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MAX11167 family.Supply types can be categorized by Analog, Digital, Single.The supply/digital voltage of this electrical AD converter is 2.3V~5V.This electronic digital converter is mounted in the way of Surface Mount.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.The maximal analog input voltage of this electrical AD converter is 5.0048V.The ADC converter operates from 5V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 38mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 1.349W.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 250 ksps.
MAX11167ETC+T Features
1 Functions
12 basic kinds of terminations
Minimal supply voltage of 4.75V
5V power supplies
MAX11167ETC+T Applications
There are a lot of Maxim Integrated MAX11167ETC+T ADC applications.
- TD-SCDMA, WiMAX
- Medical Imaging
- Microcontrollers.
- Data Acquisition Systems
- Digital beam-forming systems for ultrasound
- Communications
- Handheld Terminal Interface
- Transducer
- Industrial Process Control
- Micro and pico cell systems, software radios
