MAX11327ATJ+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2012 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 2.758W |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX11327 |
| JESD-30 Code | S-XQCC-N32 |
| Operating Supply Voltage | 3V |
| Polarity | Bipolar, Unipolar |
| Configuration | MUX-S/H-ADC |
| Number of Channels | 16 |
| Interface | SPI, Serial |
| Number of Bits | 10 |
| Input Type | Differential, Pseudo-Differential, Single Ended |
| Architecture | SAR |
| Number of Inputs | 8, 15, 16 |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Analog, Digital |
| Reference Type | External |
| Data Interface | SPI, DSP |
| Resolution | 1.25 B |
| Sampling Rate | 1 Msps |
| Voltage - Supply, Analog | 2.35V~3.6V |
| Voltage - Supply, Digital | 2.35V~3.6V |
| Number of Analog In Channels | 16 |
| Sampling Rate (Per Second) | 1M |
| Output Bit Code | 2'S COMPLEMENT BINARY |
| Linearity Error-Max (EL) | 0.039% |
| Sample and Hold / Track and Hold | TRACK |
| Number of A/D Converters | 1 |
| Conversion Rate | 1 Msps |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 3.65V |
| Signal to Noise Ratio (SNR) | 61.5 dB |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
MAX11327ATJ+ Overview
The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 32-WFQFN Exposed Pad package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 32 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 16 channels.The peak reflow temperature (Cel) amounts to NOT SPECIFIED to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 1M Hz.The input type of this electronic AD converter is Differential, Pseudo-Differential, Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.The supply/analog voltage of this electrical ADC converter is 2.35V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to MAX11327 family.There are several types of supply, categorized by Analog, Digital.The supply/digital voltage of this electrical AD converter is 2.35V~3.6V.ADC converters can be mounted using Surface Mount.8, 15, 16 inputs are employed.This electrical digital converter operates from a supply voltage of 3V.The maximal analog input voltage of this electrical AD converter is 3.65V. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 2.758W.The number of channels is growing strong/weak: 16.The conversion rate of this electrical AD converter is calculated as 1 Msps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller.
MAX11327ATJ+ Features
1 Functions
32 basic kinds of terminations
MAX11327ATJ+ Applications
There are a lot of Maxim Integrated MAX11327ATJ+ ADC applications.
- Audio/Video devices
- Digital Storage Oscilloscope
- 3-phase power control
- Communications
- Music recording
- Imaging Systems
- Communication test equipment
- Medical Instrumentation and medical imaging
- Micro and pico cell systems, software radios
- High Speed Data Acquisition
