MAX11600EKA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 1.75mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX11600 |
| Pin Count | 8 |
| Operating Supply Voltage | 5.5V |
| Polarity | Bipolar, Unipolar |
| Power Supplies | 5V |
| Configuration | MUX-S/H-ADC |
| Interface | I2C, Serial |
| Nominal Supply Current | 350μA |
| Number of Bits | 8 |
| Input Type | Pseudo-Differential, Single Ended |
| Architecture | SAR |
| Number of Inputs | 2, 4 |
| Converter Type | D/A CONVERTER |
| Supply Type | Single |
| Reference Type | External, Internal |
| Data Interface | I2C |
| Resolution | 1 B |
| Sampling Rate | 188 ksps |
| Voltage - Supply, Analog | 5V |
| Number of Analog In Channels | 4 |
| Sampling Rate (Per Second) | 188k |
| Output Bit Code | 2'S COMPLEMENT BINARY |
| Linearity Error-Max (EL) | 0.3906% |
| Sample and Hold / Track and Hold | TRACK |
| Number of A/D Converters | 1 |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 2.75V |
| Signal to Noise Ratio (SNR) | 49 dB |
| Analog Input Voltage-Min | -2.75V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX11600EKA+T Overview
The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the SOT-23-8 package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 8 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 4 channels.The is equipped with 8 pin count.The peak reflow temperature (Cel) amounts to 225 to be essentially indestructible.There are D/A CONVERTER converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 188k Hz.The input type of this electronic AD converter is Pseudo-Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MAX11600 family.A supply type can be classified by a Single number.Surface Mount is a device that can be mounted on the digital converter.2, 4 inputs are employed.This electrical digital converter operates from a supply voltage of 5.5V.The maximal analog input voltage of this electrical AD converter is 2.75V.The ADC converter operates from 5V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 1.75mW.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. The minimal analog input voltage of this electrical AD converter is -2.75V.
MAX11600EKA+T Features
1 Functions
8 basic kinds of terminations
8 pin count
5V power supplies
MAX11600EKA+T Applications
There are a lot of Maxim Integrated MAX11600EKA+T ADC applications.
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- RADAR processing, digital oscilloscopes
- Wireless and wired broadband communications
- Multicarrier, multimode digital receivers
- Uninterrupted Power Supplies
- Multiplexed Data Acquisition Systems
- Broadband data applications
- AC motor control
- Medical Instrumentation and medical imaging
- Communication Systems
