MAX11613EUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 470.6mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX11613 |
| Pin Count | 8 |
| Polarity | Bipolar, Unipolar |
| Power Supplies | 3/3.3V |
| Configuration | MUX-S/H-ADC |
| Number of Channels | 4 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 670μA |
| Number of Bits | 12 |
| Input Type | Differential, Single Ended |
| Architecture | SAR |
| Number of Inputs | 2, 4 |
| Converter Type | ADC, PROPRIETARY METHOD |
| Supply Type | Single |
| Reference Type | External, Internal |
| Data Interface | I2C |
| Resolution | 1.5 B |
| Sampling Rate | 94.4 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 2.7V~3.6V |
| Number of Analog In Channels | 4 |
| Sampling Rate (Per Second) | 94.4k |
| Output Bit Code | BINARY, 2'S COMPLEMENT BINARY |
| Integral Nonlinearity (INL) | 1 LSB |
| Sample and Hold / Track and Hold | TRACK |
| Number of A/D Converters | 1 |
| Conversion Rate | 94.4 ksps |
| Ratio - S/H:ADC | 1:1 |
| Output Format | SERIAL |
| Signal to Noise Ratio (SNR) | 70 dB |
| Max Junction Temperature (Tj) | 150°C |
| Height | 1.1mm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX11613EUA+ Overview
The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 8 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 4 channels.The is equipped with 8 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, PROPRIETARY METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 94.4k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MAX11613 family.Single is a coding scheme for identifying supply types.The supply/digital voltage of this electrical AD converter is 2.7V~3.6V.Surface Mount can be used to mount the analogue to digital converter.The ADC converter operates with the maximal supply voltage of 3.6V.2, 4 inputs are employed.It operates with the minimal supply voltage of 2.7V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.The ADC converter operates from 3/3.3V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 470.6mW.The number of channels is growing strong/weak: 4.The conversion rate of this electrical AD converter is calculated as 94.4 ksps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller.
MAX11613EUA+ Features
1 Functions
8 basic kinds of terminations
8 pin count
Minimal supply voltage of 2.7V
3/3.3V power supplies
MAX11613EUA+ Applications
There are a lot of Maxim Integrated MAX11613EUA+ ADC applications.
- Automotive
- Digital Multimeters, PLC's (Programming Logic Controllers)
- Digital Storage Oscilloscope
- Imaging Systems
- Smart antenna systems
- Broadband data applications
- Microcontrollers.
- Instrumentation and test equipment
- Communication test equipment
- Multicarrier, multimode digital receivers
