MAX11617EEE+T
| Parameters | |
|---|---|
| Conversion Rate | 94.4 ksps |
| Ratio - S/H:ADC | 1:1 |
| Signal to Noise Ratio (SNR) | 70 dB |
| Length | 4.9mm |
| Width | 3.89mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 666.7mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX11617 |
| Operating Supply Voltage | 3.6V |
| Polarity | Bipolar, Unipolar |
| Configuration | MUX-S/H-ADC |
| Interface | I2C, Serial |
| Number of Bits | 12 |
| Input Type | Differential, Single Ended |
| Architecture | SAR |
| Number of Inputs | 6, 12 |
| Converter Type | ADC, PROPRIETARY METHOD |
| Supply Type | Single |
| Reference Type | External, Internal |
| Data Interface | I2C |
| Resolution | 1.5 B |
| Sampling Rate | 94.4 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 2.7V~3.6V |
| Number of Analog In Channels | 12 |
| Sampling Rate (Per Second) | 94.4k |
| Output Bit Code | 2'S COMPLEMENT BINARY |
| Linearity Error-Max (EL) | 0.0244% |
| Sample and Hold / Track and Hold | TRACK |
| Number of A/D Converters | 1 |
MAX11617EEE+T Overview
The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 16-SSOP (0.154, 3.90mm Width) package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 16 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 12 channels.The peak reflow temperature (Cel) amounts to NOT SPECIFIED to be essentially indestructible.There are ADC, PROPRIETARY METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 94.4k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.There are 16 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to MAX11617 family.Single can be used to categorize supply types.The supply/digital voltage of this electrical AD converter is 2.7V~3.6V.There is a possibility of mounting the analogue to digital converter by using the Surface Mount axis.6, 12 inputs are employed.This electrical digital converter operates from a supply voltage of 3.6V. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 666.7mW.The conversion rate of this electrical AD converter is calculated as 94.4 ksps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller.
MAX11617EEE+T Features
1 Functions
16 basic kinds of terminations
MAX11617EEE+T Applications
There are a lot of Maxim Integrated MAX11617EEE+T ADC applications.
- Microcontrollers.
- Handheld Terminal Interface
- Multiplexed Data Acquisition Systems
- TD-SCDMA, WiMAX
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- Wireless and wired broadband communications
- Scientific instruments
- Instrumentation and test equipment
- AC motor control
- Automotive
