Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-SSOP (0.154, 3.90mm Width) |
Number of Pins |
24 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2012 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Subcategory |
Analog to Digital Converters |
Max Power Dissipation |
762mW |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.635mm |
Base Part Number |
MAX11633 |
Pin Count |
24 |
Polarity |
Unipolar |
Power Supplies |
3/3.3V |
Configuration |
S/H-ADC |
Number of Channels |
16 |
Interface |
SPI, Serial |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
2.7V |
Number of Bits |
12 |
Input Type |
Single Ended |
Architecture |
SAR |
Converter Type |
ADC, SUCCESSIVE APPROXIMATION |
Supply Type |
Single |
Reference Type |
External, Internal |
Data Interface |
SPI |
Resolution |
1.5 B |
Sampling Rate |
300 ksps |
Voltage - Supply, Analog |
2.7V~3.6V |
Voltage - Supply, Digital |
2.7V~3.6V |
Number of Analog In Channels |
16 |
Sampling Rate (Per Second) |
300k |
Output Bit Code |
BINARY |
Sample and Hold / Track and Hold |
TRACK |
Number of A/D Converters |
1 |
Conversion Rate |
300 ksps |
Ratio - S/H:ADC |
1:1 |
Analog Input Voltage-Max |
2.52V |
Length |
8.65mm |
Width |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
MAX11633EEG+ Overview
The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 24-SSOP (0.154, 3.90mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 24 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 16 channels.The is equipped with 24 pin count.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 300k Hz.The input type of this electronic AD converter is Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.There are 24 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MAX11633 family.The supply type of this electronic ADC converter is Single.The supply/digital voltage of this electrical AD converter is 2.7V~3.6V.ADC converters can be mounted using Surface Mount.The ADC converter operates with the maximal supply voltage of 3.6V.It operates with the minimal supply voltage of 2.7V.The maximal analog input voltage of this electrical AD converter is 2.52V.The ADC converter operates from 3/3.3V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 762mW.The number of channels is growing strong/weak: 16.The conversion rate of this electrical AD converter is calculated as 300 ksps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller.
MAX11633EEG+ Features
1 Functions
24 basic kinds of terminations
24 pin count
Minimal supply voltage of 2.7V
3/3.3V power supplies
MAX11633EEG+ Applications
There are a lot of Maxim Integrated MAX11633EEG+ ADC applications.
- Wireless and wired broadband communications
- Audio/Video devices
- RADAR processing, digital oscilloscopes
- 4-channel data acquisition
- Handheld Terminal Interface
- Music reproduction technology
- Battery Operated Systems
- Smart antenna systems
- Scientific instruments.
- Rotary encoder