MAX11643EEG+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| Tolerance | 10% |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Capacitance | 150μF |
| Max Power Dissipation | 762mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX11643 |
| Military Standard | MIL-PRF-55365 |
| ESR (Equivalent Series Resistance) | 1Ohm |
| Configuration | S/H-ADC |
| Interface | SPI, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Number of Bits | 8 |
| Input Type | Single Ended |
| Architecture | SAR |
| Number of Inputs | 16 |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Single |
| Reference Type | External, Internal |
| Data Interface | SPI |
| Resolution | 1 B |
| Sampling Rate | 300 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 2.7V~3.6V |
| Number of Analog In Channels | 16 |
| Sampling Rate (Per Second) | 300k |
| Output Bit Code | BINARY |
| Sample and Hold / Track and Hold | TRACK |
| Number of A/D Converters | 1 |
| Conversion Rate | 300 ksps |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 3.65V |
| Height | 2.79mm |
| Length | 6.73mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX11643EEG+ Overview
The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 24-SSOP (0.154, 3.90mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 24 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 16 channels.The peak reflow temperature (Cel) amounts to NOT SPECIFIED to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 300k Hz.The input type of this electronic AD converter is Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.There are 24 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to MAX11643 family.There are several types of supply, categorized by Single.The supply/digital voltage of this electrical AD converter is 2.7V~3.6V.Mounting the ADC converter is possible with Surface Mount.The ADC converter operates with the maximal supply voltage of 3.6V.16 inputs are employed.It operates with the minimal supply voltage of 2.7V.The maximal analog input voltage of this electrical AD converter is 3.65V. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 762mW.The conversion rate of this electrical AD converter is calculated as 300 ksps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller.
MAX11643EEG+ Features
1 Functions
24 basic kinds of terminations
Minimal supply voltage of 2.7V
MAX11643EEG+ Applications
There are a lot of Maxim Integrated MAX11643EEG+ ADC applications.
- Music recording
- Wireless and wired broadband communications
- AC motor control
- Uninterrupted Power Supplies
- Automotive
- Digital beam-forming systems for ultrasound
- Communication Systems
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- Medical Instrumentation and medical imaging
- Multiplexed Data Acquisition Systems
