MAX11645EUA+T

12 Bit 0.65mm Gold ADC MAX11645 3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX11645EUA+T
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 736
Description: 12 Bit 0.65mm Gold ADC MAX11645 3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Published	2011
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Analog to Digital Converters
Max Power Dissipation	362mW
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	0.65mm
Base Part Number	MAX11645
Pin Count	8
Polarity	Bipolar, Unipolar
Power Supplies	3/3.3V
Configuration	MUX-S/H-ADC
Interface	I2C, Serial
Max Supply Voltage	3.6V
Min Supply Voltage	2.7V
Number of Bits	12
Input Type	Differential, Single Ended
Architecture	SAR
Number of Inputs	1, 2
Converter Type	D/A CONVERTER
Supply Type	Single
Reference Type	External, Internal
Data Interface	I2C
Resolution	1.5 B
Sampling Rate	94.4 ksps
Voltage - Supply, Analog	2.7V~3.6V
Voltage - Supply, Digital	2.7V~3.6V
Number of Analog In Channels	1
Sampling Rate (Per Second)	94.4k
Output Bit Code	2'S COMPLEMENT BINARY
Linearity Error-Max (EL)	0.0244%
Integral Nonlinearity (INL)	1 LSB
Sample and Hold / Track and Hold	TRACK
Number of A/D Converters	1
Ratio - S/H:ADC	1:1
Signal to Noise Ratio (SNR)	70 dB
Differential Nonlinearity	1 LSB
Conversion Time-Max	7.5μs
Length	3mm
Width	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX11645EUA+T Overview

The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 8 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 1 channels.The is equipped with 8 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are D/A CONVERTER converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 94.4k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MAX11645 family.There are several types of supply, categorized by Single.The supply/digital voltage of this electrical AD converter is 2.7V~3.6V.It is possible to mount the analogue to digital converter using Surface Mount.The ADC converter operates with the maximal supply voltage of 3.6V.1, 2 inputs are employed.It operates with the minimal supply voltage of 2.7V.The ADC converter operates from 3/3.3V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 362mW.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller.