MAX11665AUT+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Base Part Number | MAX11665 |
| Pin Count | 6 |
| Operating Supply Voltage | 3.6V |
| Polarity | Unipolar |
| Power Supplies | 2.5/3.3V |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Interface | SPI, Serial |
| Number of Bits | 12 |
| Input Type | Single Ended |
| Architecture | SAR |
| Converter Type | A/D CONVERTER |
| Supply Type | Analog, Digital |
| Reference Type | Supply |
| Data Interface | SPI |
| Resolution | 1.5 B |
| Sampling Rate | 500 ksps |
| Voltage - Supply, Analog | 2.2V~3.6V |
| Voltage - Supply, Digital | 2.2V~3.6V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 500k |
| Output Bit Code | BINARY |
| Linearity Error-Max (EL) | 0.0244% |
| Sample and Hold / Track and Hold | SAMPLE |
| Conversion Rate | 500 ksps |
| Ratio - S/H:ADC | 1:1 |
| Signal to Noise Ratio (SNR) | 73 dB |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX11665AUT+T Overview
The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the SOT-23-6 package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 6 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The A/D converter has 1 channels.The is equipped with 6 pin count.The peak reflow temperature (Cel) amounts to 225 to be essentially indestructible.There are A/D CONVERTER converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 500k Hz.The input type of this electronic AD converter is Single Ended.There are Supply reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 6 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.2V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MAX11665 family.It is possible to categorize the supply type according to Analog, Digital.The supply/digital voltage of this electrical AD converter is 2.2V~3.6V.Surface Mount can be used to mount the AD converter on the wall.This electrical digital converter operates from a supply voltage of 3.6V.The ADC converter operates from 2.5/3.3V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 696mW.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 500 ksps.
MAX11665AUT+T Features
1 Functions
6 basic kinds of terminations
6 pin count
2.5/3.3V power supplies
MAX11665AUT+T Applications
There are a lot of Maxim Integrated MAX11665AUT+T ADC applications.
- Digital Storage Oscilloscope
- CMOS Image sensors for mobile applications
- Cell Phones
- 3-phase power control
- Wireless and wired broadband communications
- Battery Operated Systems
- Uninterrupted Power Supplies
- Instrumentation and test equipment
- RADAR processing, digital oscilloscopes
- Multiplexed Data Acquisition Systems
