MAX11666AUB+
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 707.3mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX11666 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Polarity | Unipolar |
| Configuration | MUX-S/H-ADC |
| Number of Channels | 2 |
| Interface | SPI, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.2V |
| Number of Bits | 12 |
| Input Type | Single Ended |
| Architecture | SAR |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Analog, Digital, Single |
| Reference Type | Supply |
| Data Interface | SPI |
| Resolution | 1.5 B |
| Sampling Rate | 500 ksps |
| Voltage - Supply, Analog | 2.2V~3.6V |
| Voltage - Supply, Digital | 2.2V~3.6V |
| Number of Analog In Channels | 2 |
| Sampling Rate (Per Second) | 500k |
| Output Bit Code | BINARY |
| Integral Nonlinearity (INL) | 1 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Number of A/D Converters | 1 |
| Conversion Rate | 500 ksps |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 3.65V |
| Signal to Noise Ratio (SNR) | 72.5 dB |
| Differential Nonlinearity | 1 LSB |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
MAX11666AUB+ Overview
The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 10 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The A/D converter has 2 channels.The is equipped with 10 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 500k Hz.The input type of this electronic AD converter is Single Ended.There are Supply reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.The supply/analog voltage of this electrical ADC converter is 2.2V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MAX11666 family.It is possible to categorize the supply type according to Analog, Digital, Single.The supply/digital voltage of this electrical AD converter is 2.2V~3.6V.Surface Mount can be used to mount the AD converter on the wall.The ADC converter operates with the maximal supply voltage of 3.6V.It operates with the minimal supply voltage of 2.2V.The maximal analog input voltage of this electrical AD converter is 3.65V. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 707.3mW.The number of channels is growing strong/weak: 2.The conversion rate of this electrical AD converter is calculated as 500 ksps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller.
MAX11666AUB+ Features
1 Functions
10 basic kinds of terminations
10 pin count
Minimal supply voltage of 2.2V
MAX11666AUB+ Applications
There are a lot of Maxim Integrated MAX11666AUB+ ADC applications.
- Digital signal processing
- Broadband data applications
- Digital Multimeters, PLC's (Programming Logic Controllers)
- Telecommunications
- Automotive
- Music reproduction technology
- Data Acquisition Systems
- High Speed Data Acquisition
- Instrumentation and test equipment
- TD-SCDMA, WiMAX
