MAX1196ECM+D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2002 |
| JESD-609 Code | e3 |
| Feature | Simultaneous Sampling |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Max Power Dissipation | 108mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX1196 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.6V |
| Polarity | Bipolar |
| Configuration | S/H-ADC |
| Number of Channels | 2 |
| Nominal Supply Current | 29mA |
| Number of Bits | 8 |
| Input Type | Differential, Single Ended |
| Architecture | Pipelined |
| Converter Type | ADC, FLASH METHOD |
| Supply Type | Single |
| Reference Type | External, Internal |
| Data Interface | Parallel |
| Resolution | 1 B |
| Sampling Rate | 40 Msps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 2.7V~3.6V |
| Number of Analog In Channels | 2 |
| Sampling Rate (Per Second) | 40M |
| Linearity Error-Max (EL) | 0.3906% |
| Sample and Hold / Track and Hold | TRACK |
| Conversion Rate | 40 Msps |
| Ratio - S/H:ADC | 1:1 |
| Signal to Noise Ratio (SNR) | 48.7 dB |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1196ECM+D Overview
The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 48-TQFP Exposed Pad package.The ADC converter is packaged in the way of Tray.The ADC converter is equipped with 1 Functions .There are 48 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 2 channels.The is equipped with 48 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, FLASH METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 40M Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 48 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to MAX1196 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.It is possible to categorize the supply type according to Single.The supply/digital voltage of this electrical AD converter is 2.7V~3.6V.This electronic digital converter is mounted in the way of Surface Mount.This electrical digital converter operates from a supply voltage of 3.6V. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 108mW.The number of channels is growing strong/weak: 2.The conversion rate of this electrical AD converter is calculated as 40 Msps.Simultaneous Sampling can be ensured when operating.
MAX1196ECM+D Features
1 Functions
48 basic kinds of terminations
48 pin count
MAX1196ECM+D Applications
There are a lot of Maxim Integrated MAX1196ECM+D ADC applications.
- RADAR processing, digital oscilloscopes
- Rotary encoder
- Imaging Systems
- TD-SCDMA, WiMAX
- Smart antenna systems
- Microcontrollers.
- Communication test equipment
- Wireless and wired broadband communications
- Audio/Video devices
- High Speed Data Acquisition for PCs
