MAX1198ECM+D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2002 |
| JESD-609 Code | e3 |
| Feature | Simultaneous Sampling |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Max Power Dissipation | 314mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1198 |
| Pin Count | 48 |
| Polarity | Bipolar |
| Configuration | S/H-ADC |
| Number of Channels | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 80mA |
| Number of Bits | 8 |
| Input Type | Differential, Single Ended |
| Architecture | Pipelined |
| Converter Type | ADC, FLASH METHOD |
| Supply Type | Single |
| Reference Type | External, Internal |
| Data Interface | Parallel |
| Resolution | 1 B |
| Sampling Rate | 100 Msps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 2.7V~3.6V |
| Number of Analog In Channels | 2 |
| Sampling Rate (Per Second) | 100M |
| Linearity Error-Max (EL) | 0.3906% |
| Sample and Hold / Track and Hold | TRACK |
| Conversion Rate | 100 Msps |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 1V |
| Signal to Noise Ratio (SNR) | 48.5 dB |
| Analog Input Voltage-Min | -1V |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1198ECM+D Overview
The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 48-TQFP Exposed Pad package.The ADC converter is packaged in the way of Tray.The ADC converter is equipped with 1 Functions .There are 48 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3.3V.The A/D converter has 2 channels.The is equipped with 48 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, FLASH METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 100M Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 48 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to MAX1198 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.There are several types of supply, categorized by Single.The supply/digital voltage of this electrical AD converter is 2.7V~3.6V.The ADC converter is possible to mount the device with the help of Surface Mount.The ADC converter operates with the maximal supply voltage of 3.6V.It operates with the minimal supply voltage of 2.7V.The maximal analog input voltage of this electrical AD converter is 1V. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 314mW.The number of channels is growing strong/weak: 2.The conversion rate of this electrical AD converter is calculated as 100 Msps.The minimal analog input voltage of this electrical AD converter is -1V.Simultaneous Sampling can be ensured when operating.
MAX1198ECM+D Features
1 Functions
48 basic kinds of terminations
48 pin count
Minimal supply voltage of 2.7V
MAX1198ECM+D Applications
There are a lot of Maxim Integrated MAX1198ECM+D ADC applications.
- Micro and pico cell systems, software radios
- Medical Instrumentation and medical imaging
- Digital beam-forming systems for ultrasound
- Music recording
- In-building wireless telephony
- Broadband data applications
- Multiplexed Data Acquisition Systems
- Cell Phones
- 4-channel data acquisition
- Communication Systems
