MAX1202AEPP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 889mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1202 |
| Pin Count | 20 |
| Operating Supply Voltage | 5.25V |
| Polarity | Bipolar, Unipolar |
| Power Supplies | 3/55GND/-5V |
| Configuration | MUX-S/H-ADC |
| Interface | SPI, Serial |
| Number of Bits | 12 |
| Input Type | Differential, Single Ended |
| Architecture | SAR |
| Number of Inputs | 4, 8 |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Dual |
| Reference Type | External, Internal |
| Data Interface | SPI |
| Resolution | 1.5 B |
| Sampling Rate | 133 ksps |
| Voltage - Supply, Analog | ±5V 5V |
| Voltage - Supply, Digital | 2.7V~5.25V |
| Number of Analog In Channels | 8 |
| Sampling Rate (Per Second) | 133k |
| Output Bit Code | BINARY, 2'S COMPLEMENT BINARY |
| Sample and Hold / Track and Hold | TRACK |
| Number of A/D Converters | 1 |
| Conversion Rate | 133 ksps |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 2.048V |
| Signal to Noise Ratio (SNR) | 70 dB |
| Negative Supply Voltage-Nom | -5V |
| Analog Input Voltage-Min | -2.048V |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1202AEPP+ Overview
The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 20-DIP (0.300, 7.62mm) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 8 channels.The is equipped with 20 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Through Hole.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 133k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.There are 20 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is ±5V 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MAX1202 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.It is possible to categorize the supply type according to Dual.The supply/digital voltage of this electrical AD converter is 2.7V~5.25V.Through Hole can be used to mount the AD converter on the wall.4, 8 inputs are employed.This electrical digital converter operates from a supply voltage of 5.25V.The maximal analog input voltage of this electrical AD converter is 2.048V.The ADC converter operates from 3/55GND/-5V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 889mW.The conversion rate of this electrical AD converter is calculated as 133 ksps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. The minimal analog input voltage of this electrical AD converter is -2.048V.
MAX1202AEPP+ Features
1 Functions
20 basic kinds of terminations
20 pin count
3/55GND/-5V power supplies
MAX1202AEPP+ Applications
There are a lot of Maxim Integrated MAX1202AEPP+ ADC applications.
- Microcontrollers.
- RADAR processing, digital oscilloscopes
- Data Acquisition Systems
- High Speed Data Acquisition
- Micro and pico cell systems, software radios
- Medical Imaging
- Wireless local loop
- Scientific instruments.
- Music recording
- Communication test equipment
