MAX1204ACPP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 20 |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 889mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Operating Supply Voltage | 5.25V |
| Polarity | Bipolar, Unipolar |
| Power Supplies | 3/55GND/-5V |
| Temperature Grade | COMMERCIAL |
| Interface | SPI, Serial |
| Number of Bits | 10 |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Dual |
| Resolution | 1.25 B |
| Sampling Rate | 133 ksps |
| Number of Analog In Channels | 8 |
| Output Bit Code | BINARY |
| Linearity Error-Max (EL) | 0.0488% |
| Sample and Hold / Track and Hold | TRACK |
| Number of A/D Converters | 1 |
| Conversion Rate | 133 ksps |
| Analog Input Voltage-Max | 4.096V |
| Signal to Noise Ratio (SNR) | 66 dB |
| Negative Supply Voltage-Nom | -5V |
| Analog Input Voltage-Min | -4.096V |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1204ACPP+ Overview
The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the DIP package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 8 channels.The is equipped with 20 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.There are 20 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.A supply type can be classified by a Dual number.ADC converters can be mounted using Through Hole.This electrical digital converter operates from a supply voltage of 5.25V.The maximal analog input voltage of this electrical AD converter is 4.096V.The ADC converter operates from 3/55GND/-5V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 889mW.The conversion rate of this electrical AD converter is calculated as 133 ksps.It operates with the maximal operating temperature of 70°C to ensure its reliability.It operates with the minimal operating temperature of 0°C to ensure its reliability.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. The minimal analog input voltage of this electrical AD converter is -4.096V.
MAX1204ACPP+ Features
1 Functions
20 basic kinds of terminations
20 pin count
3/55GND/-5V power supplies
MAX1204ACPP+ Applications
There are a lot of Maxim Integrated MAX1204ACPP+ ADC applications.
- Micro and pico cell systems, software radios
- Broadband data applications
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- Wireless local loop
- Instrumentation and test equipment
- Communication test equipment
- Spectrum Analysis
- Wireless and wired broadband communications
- Multiplexed Data Acquisition Systems
- Communications
