MAX1204AEAP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1204 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/55GND/-5V |
| Configuration | MUX-S/H-ADC |
| Number of Bits | 10 |
| Input Type | Differential, Single Ended |
| Architecture | SAR |
| Number of Inputs | 4, 8 |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Reference Type | External, Internal |
| Data Interface | SPI |
| Voltage - Supply, Analog | ±5V 5V |
| Voltage - Supply, Digital | ±5V 5V |
| Number of Analog In Channels | 8 |
| Sampling Rate (Per Second) | 133k |
| Output Bit Code | BINARY |
| Linearity Error-Max (EL) | 0.0488% |
| Sample and Hold / Track and Hold | TRACK |
| Number of A/D Converters | 1 |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 4.096V |
| Output Format | SERIAL |
| Negative Supply Voltage-Nom | -5V |
| Analog Input Voltage-Min | -4.096V |
| Length | 7.2mm |
| Width | 5.29mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1204AEAP+ Overview
The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 20-SSOP (0.209, 5.30mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 8 channels.The is equipped with 20 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 133k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.The supply/analog voltage of this electrical ADC converter is ±5V 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.This analogue to digital converter is included in Analog to Digital Converters.It belongs to MAX1204 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The supply/digital voltage of this electrical AD converter is ±5V 5V.4, 8 inputs are employed.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.The maximal analog input voltage of this electrical AD converter is 4.096V.The ADC converter operates from 3/55GND/-5V power supplies.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. The minimal analog input voltage of this electrical AD converter is -4.096V.
MAX1204AEAP+ Features
1 Functions
20 basic kinds of terminations
20 pin count
3/55GND/-5V power supplies
MAX1204AEAP+ Applications
There are a lot of Maxim Integrated MAX1204AEAP+ ADC applications.
- Telecommunications
- AC motor control
- Micro and pico cell systems, software radios
- Industrial Process Control
- Digital Multimeters, PLC's (Programming Logic Controllers)
- Data Acquisition Systems
- Uninterrupted Power Supplies
- Communication test equipment
- Communications
- Rotary encoder
