MAX1228BEEP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Feature | Temperature Sensor |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 727mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX1228 |
| Pin Count | 20 |
| Polarity | Bipolar, Unipolar |
| Power Supplies | 5V |
| Configuration | MUX-S/H-ADC |
| Interface | SPI, Serial |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 12 |
| Input Type | Differential, Single Ended |
| Architecture | SAR |
| Number of Inputs | 6, 12 |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Single |
| Reference Type | External, Internal |
| Data Interface | SPI |
| Resolution | 1.5 B |
| Sampling Rate | 300 ksps |
| Voltage - Supply, Analog | 5V |
| Number of Analog In Channels | 12 |
| Sampling Rate (Per Second) | 300k |
| Output Bit Code | BINARY, 2'S COMPLEMENT BINARY |
| Linearity Error-Max (EL) | 0.0244% |
| Integral Nonlinearity (INL) | 1 LSB |
| Sample and Hold / Track and Hold | TRACK |
| Number of A/D Converters | 1 |
| Conversion Rate | 300 ksps |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 2.048V |
| Signal to Noise Ratio (SNR) | 70 dB |
| Differential Nonlinearity | 1 LSB |
| Analog Input Voltage-Min | -2.048V |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1228BEEP+ Overview
The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 20-SSOP (0.154, 3.90mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 12 channels.The is equipped with 20 pin count.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 300k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.There are 20 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MAX1228 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.A supply type can be classified by a Single number.The ADC converter is possible to mount the device with the help of Surface Mount.The ADC converter operates with the maximal supply voltage of 5.25V.6, 12 inputs are employed.It operates with the minimal supply voltage of 4.75V.The maximal analog input voltage of this electrical AD converter is 2.048V.The ADC converter operates from 5V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 727mW.The conversion rate of this electrical AD converter is calculated as 300 ksps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. The minimal analog input voltage of this electrical AD converter is -2.048V.Temperature Sensor can be ensured when operating.
MAX1228BEEP+ Features
1 Functions
20 basic kinds of terminations
20 pin count
Minimal supply voltage of 4.75V
5V power supplies
MAX1228BEEP+ Applications
There are a lot of Maxim Integrated MAX1228BEEP+ ADC applications.
- High Speed Data Acquisition for PCs
- High Speed Data Acquisition
- Music reproduction technology
- Medical Imaging
- Scientific instruments
- Communications
- Industrial Process Control
- Broadband data applications
- Telecommunications
- Wireless and wired broadband communications
