MAX1232CPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PUSHBUTTON RESET INPUT |
| Subcategory | Power Management Circuits |
| Voltage - Rated DC | 5V |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1232 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Max Output Current | 10mA |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 50μA |
| Max Supply Current | 200μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.37V 4.62V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 250ms Minimum |
| Threshold Voltage | +4.37/4.62V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.49V |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1232CPA+ Overview
There are 8 terminals connected to this power management, which makes it easy to mount. Power management is packaged in a Tube way. In this PMIC, you can find 1 functions for your reference. There are 1 channels available on this supervisor, and each channel has a different function. For your reference, this PMIC includes a list of 8-DIP (0.300, 7.62mm) functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 5V-voltage supply. When 1 is applied to the power ic, it conducts. Power management is included in the Through Hole mount. The power management belongs to the Power Management Circuits subcategory. In total, IC powers are 8 pins on the board. This power management has 8 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 4.5V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Through Hole. We recommend setting the supervisors to 0°C~70°C TA degrees. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The supervisor's supply current is specified to 200μA. Among other features, IC power can be also taken advantage of [0], for instance. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX1232, which is the base power ics number. This power management requires 5V power to work. Voltage supervisor can work with a supply temperature of 200μA at the most.
MAX1232CPA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
200μA operating supply current
MAX1232CPA+ Applications
There are a lot of Maxim Integrated MAX1232CPA+ Voltage Supervisors applications.
- Power distribution systems of infant care room
- Personal computers
- Telecommunications equipment
- Display equipment
- Digitally controlled LDO regulators circuit
- Embedded computing
- Leakage protection
- Urban rail transit weak current power monitoring
- Power communication system
- Battery-powered equipment
