MAX1232CWE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Additional Feature | PUSHBUTTON RESET INPUT |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX1232 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 200μA |
| Max Supply Current | 200μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.37V 4.62V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 250ms Minimum |
| Threshold Voltage | +4.37/4.62V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.49V |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX1232CWE Overview
It is mounted through 16 terminals on the power management. There is a Tube-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of 16-SOIC (0.295, 7.50mm Width) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 240. A supply voltage of 4.5V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. By Surface Mount, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. It has a total of 16 pins that are attached to IC management. There should be a minimum voltage supply (Vsup) of 4.5V for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: 0°C~70°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 200μA is the recommended value. Power management is also possible to add other features such as PUSHBUTTON RESET INPUT to name a few. For similar manage ics search of the manufacturer, you can always refer to MAX1232, the base PMIC number. A power supply of 5V watts is required for the operation of this power management. A maximum supply temperature of 200μA can be used with this power management.
MAX1232CWE Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
200μA operating supply current
MAX1232CWE Applications
There are a lot of Maxim Integrated MAX1232CWE Voltage Supervisors applications.
- Unattended substation automation
- Embedded computing
- Medical-specific isolation transformer
- Magnetic resonance imaging
- Consumer electronics
- Leakage protection
- Display equipment
- Efficient information transmission
- Important electronics for automotive protection
- Military communications
