MAX1232EPA+
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PUSHBUTTON RESET INPUT |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1232 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 5V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.37V 4.62V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 250ms Minimum |
| Supply Current-Max (Isup) | 0.2mA |
| Threshold Voltage | +4.37/4.62V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
MAX1232EPA+ Overview
It is mounted through 8 terminals on the power management. Packaged in the form of a Tube, power management is easy to use. Please find attached 1 functions for your reference in this IC power. There are a total of 1 channels on this supervisor, and they are arranged in a series. The purpose of this IC power is to provide you with a reference of 8-DIP (0.300, 7.62mm) functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. The package peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 4.5V. Power ics operate at 1 supply voltages. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 8 pins in it. 8 pins are on the supervisor. Through Hole mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. Power management is also possible to add other features such as PUSHBUTTON RESET INPUT to name a few. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX1232, which is the base power ics number. This power management requires 5V power to work.
MAX1232EPA+ Features
Simple Reset/Power-On Reset type
MAX1232EPA+ Applications
There are a lot of Maxim Integrated MAX1232EPA+ Voltage Supervisors applications.
- FPGA design
- Household appliances
- Precision measurement
- Detection of phase imbalance
- Electronics installed in the vehicle
- Automotive power systems
- Telecommunications equipment
- Utility meter
- Display equipment
- Important electronics for automotive protection
