Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Additional Feature |
PUSHBUTTON RESET INPUT |
Subcategory |
Power Management Circuits |
Voltage - Rated DC |
5V |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Terminal Pitch |
2.54mm |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
MAX1232 |
Output |
Open Drain or Open Collector |
Pin Count |
8 |
Max Output Current |
10mA |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Operating Supply Current |
200μA |
Nominal Supply Current |
50μA |
Max Supply Current |
200μA |
Adjustable Threshold |
NO |
Watchdog Timer |
Yes |
Reset |
Active High/Active Low |
Voltage - Threshold |
4.37V 4.62V |
Number of Voltages Monitored |
1 |
Reset Timeout |
250ms Minimum |
Min Reset Threshold Voltage |
4.25V |
Max Reset Threshold Voltage |
4.74V |
Threshold Voltage |
+4.37/4.62V |
Undervoltage Threshold |
4.25V |
Overvoltage Threshold |
4.49V |
Height |
4.45mm |
Length |
9.91mm |
Width |
7.87mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MAX1232EPA Overview
This power management consists of 8 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tube. Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. Please find attached 8-DIP (0.300, 7.62mm) functions for your reference in this IC power. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. According to the specification, the package's peak reflow temperature is specified to be 240. During operation, the power ic is supplied with a voltage of 4.5V. When 1 is applied to the power ic, it conducts. The mount is provided by Through Hole. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. Pin count of the power management is 8. A voltage (Vsup) that doesn't fall below 4.5V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Through Hole mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. Supplied with a operating current of 200μA, this PMIC is capable of fully function as specified. Supervisors are also additional features, such as [0] for example, which are worth mentioning. A similar IC managements number of the manufacturer can always be found by using MAX1232, the base power ics number. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. The power management can work with a maximum supply temperature of 200μA.
MAX1232EPA Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
200μA operating supply current
MAX1232EPA Applications
There are a lot of Maxim Integrated MAX1232EPA Voltage Supervisors applications.
- Important electronics for automotive safety
- Functional modules
- Network equipment
- Unattended substation automation
- Power distribution systems of CCU
- Power communication system
- Fire equipment power monitoring system
- Solar power charger
- Smart meter
- Radio