MAX1232EWE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PUSHBUTTON RESET INPUT |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1232 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 200μA |
| Max Supply Current | 200μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.37V 4.62V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 250ms Minimum |
| Threshold Voltage | +4.37/4.62V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.49V |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1232EWE+T Overview
This voltage supervisor has a total of 16 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. For your reference, this IC power includes a list of 1 functions. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes 16-SOIC (0.295, 7.50mm Width) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts at a voltage of 4.5V. Power management conducts at a voltage of 1. Surface Mount mounts power management on the wall. There is a subcategory called Power Management Circuits for this power management. It has a total of 16 pins that are attached to IC management. 16 pins are present on the power management system. IC management can only work with a supply voltage of 4.5V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The supply current of the power management is 200μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. It is always advisable to use MAX1232, the base supervisor number, when searching for similar PMICs from the manufacturer. To operate this power management, you will need at least 5V volts of power. The maximum supply temperature voltage supervisor can handle is 200μA.
MAX1232EWE+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
200μA operating supply current
MAX1232EWE+T Applications
There are a lot of Maxim Integrated MAX1232EWE+T Voltage Supervisors applications.
- Unattended substation automation
- Battery cars
- Leakage protection
- Detection of phase loss
- Automotive power systems
- Stable power system
- Set top box
- Functional modules
- Kitchen appliances
- FPGA design
