MAX1302AEUG+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| Feature | PGA |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Max Power Dissipation | 1.11W |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX1302 |
| Polarity | Bipolar, Unipolar |
| Configuration | MUX-PGA-S/H-ADC |
| Number of Channels | 8 |
| Interface | SPI, Serial |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 16 |
| Input Type | Differential, Single Ended |
| Architecture | SAR |
| Number of Inputs | 4, 8 |
| Converter Type | D/A CONVERTER |
| Supply Type | Analog, Digital |
| Reference Type | External, Internal |
| Data Interface | SPI |
| Resolution | 2 B |
| Sampling Rate | 115 ksps |
| Voltage - Supply, Analog | 5V |
| Sampling Rate (Per Second) | 115k |
| Number of A/D Converters | 1 |
| Conversion Rate | 115 ksps |
| Ratio - S/H:ADC | 1:1 |
| Signal to Noise Ratio (SNR) | 90 dB |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX1302AEUG+ Overview
The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 24-TSSOP (0.173, 4.40mm Width) package.The ADC converter is packaged in the way of Tube.The peak reflow temperature (Cel) amounts to NOT SPECIFIED to be essentially indestructible.There are D/A CONVERTER converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 115k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-PGA-S/H-ADC.The architecture that analogue to digital converter's core adopts is SAR.There are 24 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to MAX1302 family.It is possible to categorize the supply type according to Analog, Digital.The ADC converter is possible to mount the device with the help of Surface Mount.The ADC converter operates with the maximal supply voltage of 5.25V.4, 8 inputs are employed.It operates with the minimal supply voltage of 4.75V. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 1.11W.The number of channels is growing strong/weak: 8.The conversion rate of this electrical AD converter is calculated as 115 ksps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. PGA can be ensured when operating.
MAX1302AEUG+ Features
Minimal supply voltage of 4.75V
MAX1302AEUG+ Applications
There are a lot of Maxim Integrated MAX1302AEUG+ ADC applications.
- Music reproduction technology
- Wireless local loop
- RADAR processing, digital oscilloscopes
- High Speed Data Acquisition
- Automotive
- Handheld Terminal Interface
- Multicarrier, multimode digital receivers
- Cell Phones
- Rotary encoder
- Spectrum Analysis
