MAX13030EETE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Feature | Power Supply Decoupling |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Interface ICs |
| Max Power Dissipation | 2W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX13030E |
| Pin Count | 16 |
| Output Type | Open Drain, Push-Pull |
| Power Supplies | 2.5/3.3V |
| Number of Channels | 6 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.2V |
| Nominal Supply Current | 16μA |
| Propagation Delay | 6.5 ns |
| Turn On Delay Time | 6.5 ns |
| Logic Function | Translator |
| Data Rate | 100Mbps |
| Interface IC Type | INTERFACE CIRCUIT |
| High Level Output Current | -20μA |
| Channel Type | Bidirectional |
| Low Level Output Current | 20μA |
| Supply Voltage1-Nom | 3.3V |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.62V~3.2V |
| Voltage - VCCB | 2.2V~3.6V |
| Height | 730μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX13030EETE+ Overview
The 16-WQFN Exposed Pad package contains it.A package of Tube has been used.Level translators uses Open Drain, Push-Pull as the output.Its translator type is Voltage Level.Level translators is mounted according to the Surface Mount method.The Channel type of this electrical device is Bidirectional.In the operating environment, the temperature is -40°C~85°C TA.The circuit's superior flexibility is achieved through the use of 1 circuits.To end a transmission line, there are 16 types of termination that can be used.Based on this base part number MAX13030E, its related parts can be identified.This device is powered by a supply voltage of 1.8V which is applied to it.With 16 pins, it is equipped with a minimal number of connections.16 pins are used in its design.Level translators supports the maximal supply voltage of 3.6V.In order for the machine to operate, the supply voltage must be 2.2V.In the VCCA supply rail, 1.62V~3.2V is configured.VCCB is configured with a supply rail that starts at 2.2V~3.6V.Using the method of Surface Mount, this electronic component is mounted.6 is the number of channels available in the system.Level translators belongs to the group of Other Interface ICs.As long as Power Supply Decoupling is ensured, operations will succeed.A 2.5/3.3V power supply powers it.
MAX13030EETE+ Features
16-WQFN Exposed Pad package
1 circuits
16 pin count
16 pins
2.5/3.3V power supplies
MAX13030EETE+ Applications
There are a lot of Maxim Integrated MAX13030EETE+ voltage translators & level shifters applications.
- Driving Indicator LEDs or Buzzers
- Wearable Health and Fitness Devices
- Enterprise and communications
- One Fabrication Site
- Infotainment Head Unit
- Extended Product Life Cycle
- Test Site
- Electronic Points of Sale
- PMBus
- Controlled Baseline
