MAX13086EASD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | MATTE TIN |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX13086E |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 1.8mA |
| Data Rate | 16Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 100mV |
| Interface Standard | EIA-422; EIA-485 |
| Receive Delay-Max | 80 ns |
| Transmit Delay-Max | 50 ns |
| Output Low Current-Max | 0.001A |
| Out Swing-Min | 2 V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX13086EASD+ Overview
LED drivers benefit from this IC's enhanced 14-SOIC (0.154, 3.90mm Width) package.Tube package is used for this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.You can place this wide receiver to any Surface Mount-type PCB or development board.In terms of power supply, this differential driver utilizes 4.5V~5.5V.As many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~125°C.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.This integrated circuit has 14 terminations designed for driving and receiving signals from data.This transceiver is packaged with 14 market standard pinoutsMAX13086E is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation control driver IC featuring 14 pins.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.This receiver is typically specified with a resolution of 1 bits. A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.Driver ICs such as this one are designed to operate from 5V power sources.The optical transceiver module's VCC pin should receive enough input current, but not more than 1.8mA.
MAX13086EASD+ Features
Tube package
14 pin count
14 pins
5V power supply
MAX13086EASD+ Applications
There are a lot of Maxim Integrated MAX13086EASD+ Drivers/Receivers/Transceivers applications.
- Switches
- IP cameras
- Wireless transmission
- Wired telephone
- Portable radio
- Satellite radio receiver
- Datacom networking applications
- Long-distance fiber optic network applications
- Military satellite communications
- Wireless teaching
