MAX1308ECM+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2012 |
| JESD-609 Code | e3 |
| Feature | Simultaneous Sampling |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 1.82W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1308 |
| Pin Count | 48 |
| Polarity | Bipolar |
| Power Supplies | 35V |
| Configuration | MUX-S/H-ADC |
| Number of Channels | 8 |
| Interface | Parallel, SPI |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 12 |
| Input Type | Single Ended |
| Architecture | SAR |
| Converter Type | ADC, PROPRIETARY METHOD |
| Supply Type | Analog, Digital |
| Reference Type | External, Internal |
| Data Interface | Parallel |
| Resolution | 1.5 B |
| Sampling Rate | 3.65 Msps |
| Voltage - Supply, Analog | 5V |
| Voltage - Supply, Digital | 2.7V~5.25V |
| Number of Analog In Channels | 8 |
| Sampling Rate (Per Second) | 456k |
| Output Bit Code | OFFSET BINARY, 2'S COMPLEMENT BINARY |
| Linearity Error-Max (EL) | 0.0244% |
| Sample and Hold / Track and Hold | TRACK |
| Number of A/D Converters | 1 |
| Number of Converters | 1 |
| Conversion Rate | 1.075 Msps |
| Ratio - S/H:ADC | 8:1 |
| Analog Input Voltage-Max | 5V |
| Signal to Noise Ratio (SNR) | 71 dB |
| Analog Input Voltage-Min | -5V |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX1308ECM+ Overview
The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 48-LQFP package.The ADC converter is packaged in the way of Tray.The ADC converter is equipped with 1 Functions .There are 48 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 8 channels.The is equipped with 48 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, PROPRIETARY METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 456k Hz.The input type of this electronic AD converter is Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.There are 48 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MAX1308 family.Analog, Digital is a coding scheme for identifying supply types.The supply/digital voltage of this electrical AD converter is 2.7V~5.25V.Mounting the ADC converter is possible with Surface Mount.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.The maximal analog input voltage of this electrical AD converter is 5V.The ADC converter operates from 35V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 1.82W.The number of channels is growing strong/weak: 8.The conversion rate of this electrical AD converter is calculated as 1.075 Msps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. The minimal analog input voltage of this electrical AD converter is -5V.There are 1 converters, which will convert numbers to words and figures to words. Simultaneous Sampling can be ensured when operating.
MAX1308ECM+ Features
1 Functions
48 basic kinds of terminations
48 pin count
Minimal supply voltage of 4.75V
35V power supplies
MAX1308ECM+ Applications
There are a lot of Maxim Integrated MAX1308ECM+ ADC applications.
- Rotary encoder
- Digital Multimeters, PLC's (Programming Logic Controllers)
- Medical Instrumentation and medical imaging
- Micro and pico cell systems, software radios
- AC motor control
- Digital Storage Oscilloscope
- Communications
- Broadband data applications
- High Speed Data Acquisition for PCs
- Telecommunications
