MAX13103EETL+
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-WFQFN Exposed Pad |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Feature | Power Supply Decoupling |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.65V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX13103 |
| Pin Count | 40 |
| Output Type | Tri-State, Non-Inverted |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 10μA |
| Output Current | 20μA |
| Propagation Delay | 20 ns |
| Logic Function | Translator |
| Data Rate | 20Mbps |
| Interface IC Type | TELEPHONE RELAY DRIVER |
| High Level Output Current | -20μA |
| Channel Type | Bidirectional |
| Low Level Output Current | 20μA |
| Built-in Protections | TRANSIENT |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~5.5V |
| Voltage - VCCB | 1.65V~5.5V |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX13103EETL+ Overview
The 40-WFQFN Exposed Pad package contains it.The package is in the form of Tube.The output it is configured with uses Tri-State, Non-Inverted.There is Voltage Level translator type for this electrical device.Surface Mount is used to mount this electronic part.Electrical device with type Bidirectional channel.During operation, the temperature is set to -40°C~85°C TA.The superior flexibility of the system is achieved through its use of 1 circuits.When it comes to terminating a transmission line, there are 40 terminations.Parts related to a base part number MAX13103 are designated by the same number.A supply voltage of 1.65V is used to power the device.With 40 pins, it is equipped with a minimal number of connections.Designed with 40 pins, it is compatible with a wide range of devices.5.5V is the maximum voltage it supports.The minimal supply voltage is 1.65V.VCCA is configured with a supply rail that starts at 1.2V~5.5V.1.65V~5.5V is the supply rail configuration on the VCCB.Level translators has been mounted wLevel translatorsh the method of Surface Mount.16 is the number of channels available in the system.As part of Peripheral Drivers, this part is included.When operating, Power Supply Decoupling can be ensured.The output current of 20μA makes it feature maximum design flexibility.
MAX13103EETL+ Features
40-WFQFN Exposed Pad package
1 circuits
40 pin count
40 pins
MAX13103EETL+ Applications
There are a lot of Maxim Integrated MAX13103EETL+ voltage translators & level shifters applications.
- Eliminate slow or noisy input signals
- Industrial Equipment
- Controlled Baseline
- SMBus
- Telematics
- Debouncing a mechanical switch
- Data and Clock Transmission Over Backplane
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- GPIO
- Signaling Level Conversion for Clock or Data
