MAX13223EEUP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX13223 |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Power Supplies | 3.3/5V |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 15mA |
| Propagation Delay | 800 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | YES |
| Protocol | RS232 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 300 ns |
| Height | 950μm |
| Length | 6.6mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX13223EEUP+ Overview
Due to the enhanced 20-TSSOP (0.173, 4.40mm Width) package, this driver IC is excellent for driving common LEDs.Tube package is used for this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.Power supply requirements for this differential driver are 3V~5.5V.At any one time, this electronic part can have up to 2/2 eligible receivers/drivers.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.Wide receiver can operate within the range of 3.3V supply voltages efficiently.Integrated into this wide receiver are 20 terminations that are used for driving and receiving signals from data.As a standard package, this transceiver comes with a 20-pin layout that follows the market standard.With the part number MAX13223 identifying the product type, temperature, package, etc., you can search with it to see more variants.It is a 20-pin driver IC with enhanced power dissipation controls.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.There are typically 2 bits of resolution specified in the specifications of this receiver.There are two types of input voltage supply available for this IC, 3.3V.There is a subcategory called Line Driver or Receivers for this rf transceiver module.IC3.3/5V is a high performance driver IC designed to work with a 3.3/5V power supply.There are 1 transceivers in total that this module isolated transceiver implements.The part is embedded with 2 drivers, so it can be used with 2 devices.An IC with 8 standard serial I/Os is provided in this package.
MAX13223EEUP+ Features
Tube package
20 pin count
20 pins
3.3/5V power supply
MAX13223EEUP+ Applications
There are a lot of Maxim Integrated MAX13223EEUP+ Drivers/Receivers/Transceivers applications.
- Switching system
- Military satellite communications
- Televisions
- Notebook
- Carrier phase observations
- Wireless smart house
- Metro access rings
- Structural bonding
- Indoor ad hoc meeting
- Ship
