MAX13487EESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 506.605978mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 471mW |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX13487 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Operating Supply Current | 4.5mA |
| Nominal Supply Current | 4.5mA |
| Data Rate | 500kbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 25mV |
| Number of Transceivers | 1 |
| Simplex/Duplex | Half Duplex |
| Max Junction Temperature (Tj) | 150°C |
| Height | 1.75mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX13487EESA+ Overview
LED drivers with the enhanced 8-SOIC (0.154, 3.90mm Width) package will be able to drive a variety of common LEDs with ease.In the Tube package, this receiver is mounted.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.This differential driver consumes 4.75V~5.25V for its power supplyThe field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.In this package, you will find 8 market-standard pinouts for this transceiver.Since the part number MAX13487 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.The driver IC has improved power dissipation control.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.This receiver is typically specified with a resolution of 1 bits. As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.There are 1 transceivers implemented in this module isolated transceiver.Input voltage is set to a value of 4.5mA, and this integrating circuit is capable of driving LEDs with that voltage.
MAX13487EESA+ Features
Tube package
8 pin count
8 pins
5V power supply
MAX13487EESA+ Applications
There are a lot of Maxim Integrated MAX13487EESA+ Drivers/Receivers/Transceivers applications.
- Sensor reporting
- Cell phones
- 1x/2x Fiber Channel
- Interconnection between switches and computers
- Precision engineering measurement
- Satellite communications networks
- Wireless teaching
- transmission relay
- Changeing the frequency from IF to RF
- Car alarm systems
