MAX1401EAI+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Feature | PGA |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 21.45mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1401 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.6V |
| Polarity | Bipolar, Unipolar |
| Power Supplies | 3/3.3V |
| Configuration | MUX-PGA-ADC |
| Interface | SPI, Serial |
| Number of Bits | 18 |
| Input Type | Differential, Pseudo-Differential |
| Architecture | Sigma-Delta |
| Number of Inputs | 3, 5 |
| Converter Type | ADC, DELTA-SIGMA |
| Supply Type | Analog, Digital |
| Reference Type | External |
| Data Interface | SPI |
| Resolution | 2.25 B |
| Sampling Rate | 480 sps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 2.7V~3.6V |
| Number of Analog In Channels | 5 |
| Sampling Rate (Per Second) | 480 |
| Output Bit Code | BINARY |
| Integral Nonlinearity (INL) | 0.002 LSB |
| Number of A/D Converters | 1 |
| Conversion Rate | 4.8 ksps |
| Height | 1.78mm |
| Length | 10.33mm |
| Width | 5.38mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1401EAI+ Overview
The analogue to digital converter is designed with 18 Bits.The AD converter is embedded in the 28-SSOP (0.209, 5.30mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 28 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3.3V.The A/D converter has 5 channels.The is equipped with 28 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 480 Hz.The input type of this electronic AD converter is Differential, Pseudo-Differential.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-PGA-ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 28 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MAX1401 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.There are several types of supply that can be categorized according to Analog, Digital.The supply/digital voltage of this electrical AD converter is 2.7V~3.6V.Mounting the ADC converter is possible with Surface Mount.3, 5 inputs are employed.This electrical digital converter operates from a supply voltage of 3.6V.The ADC converter operates from 3/3.3V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 21.45mW.The conversion rate of this electrical AD converter is calculated as 4.8 ksps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. PGA can be ensured when operating.
MAX1401EAI+ Features
1 Functions
28 basic kinds of terminations
28 pin count
3/3.3V power supplies
MAX1401EAI+ Applications
There are a lot of Maxim Integrated MAX1401EAI+ ADC applications.
- Multiplexed Data Acquisition Systems
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- Battery Operated Systems
- Displaying
- Digital Multimeters, PLC's (Programming Logic Controllers)
- High Speed Data Acquisition for PCs
- Audio/Video devices
- RADAR processing, digital oscilloscopes
- Wireless local loop
- CMOS Image sensors for mobile applications
