MAX1406EWE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1406 |
| Pin Count | 16 |
| Operating Supply Voltage | 5.5V |
| Voltage | 5V |
| Number of I/O | 12 |
| Nominal Supply Current | 1mA |
| Propagation Delay | 400 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 230kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 3/3 |
| Receiver Number of Bits | 3 |
| Duplex | Full |
| Receiver Hysteresis | 650mV |
| Number of Drivers | 3 |
| Number of Transceivers | 1 |
| Receive Delay-Max | 4000 ns |
| Transmit Delay-Max | 4000 ns |
| Supply Voltage1-Nom | 24V |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1406EWE+T Overview
An excellent driver IC for common LEDs thanks to its enhanced 16-SOIC (0.295, 7.50mm Width) package.In the Tape & Reel (TR) package, this receiver is mounted.The Transceiver can transceiver type enables this part to be used in a wide range of applications.The wide receiver can be mounted on any Surface Mount-type PCB or development board.This differential driver consumes 4.5V~5.5V for its power supplyAs many as 3/3 eligible receivers/drivers can be used simultaneously with this electronic part.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.An operating voltage range of 5V is suitable for this line driver ic.For driving and receiving signals from data, this wide receiver has 16 terminations integrated.This transceiver is packaged with 16 market standard pinoutsFor more variants of this part, try searching with the base part number MAX1406, which indicates the product type, temperature, package, etc.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.There are typically 3 bits of resolution specified in the specifications of this receiver.There is a voltage input supply of 5.5V required for the operation of this integrated circuit.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.There are 1 transceivers in total implemented by this IC.On the integrator circuit are embedded 3 drivers.This is an IC that comes with a total of 12 standard serial I/O ports.
MAX1406EWE+T Features
Tape & Reel (TR) package
16 pin count
MAX1406EWE+T Applications
There are a lot of Maxim Integrated MAX1406EWE+T Drivers/Receivers/Transceivers applications.
- Indoor ad hoc meeting
- Optical sub-assembly (OSA)
- Aircraft navigation
- transmission relay
- Carrier phase observations
- Clock radio
- Wireless showroom
- Thermal management
- Cable network front end
- Data center
