MAX1416EUE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Feature | PGA |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Converters |
| Max Power Dissipation | 755mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1416 |
| Pin Count | 16 |
| Polarity | Bipolar, Unipolar |
| Power Supplies | 3V |
| Configuration | MUX-PGA-ADC |
| Number of Channels | 2 |
| Interface | SPI, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Number of Bits | 16 |
| Input Type | Differential |
| Architecture | Sigma-Delta |
| Converter Type | ADC, DELTA-SIGMA |
| Supply Type | Single |
| Reference Type | External |
| Data Interface | SPI |
| Resolution | 2 B |
| Sampling Rate | 500 sps |
| Voltage - Supply, Analog | 5V |
| Number of Analog In Channels | 2 |
| Sampling Rate (Per Second) | 500 |
| Output Bit Code | BINARY, OFFSET BINARY |
| Sample and Hold / Track and Hold | TRACK |
| Number of A/D Converters | 1 |
| Conversion Rate | 500 sps |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX1416EUE+ Overview
The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 16-TSSOP (0.173, 4.40mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 16 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 2 channels.The is equipped with 16 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 500 Hz.The input type of this electronic AD converter is Differential.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-PGA-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is Sigma-Delta.The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Other Converters.It belongs to MAX1416 family.Supply types can be categorized by Single.There is a possibility of mounting the analogue to digital converter by using the Surface Mount axis.The ADC converter operates with the maximal supply voltage of 3.6V.It operates with the minimal supply voltage of 2.7V.The ADC converter operates from 3V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 755mW.The number of channels is growing strong/weak: 2.The conversion rate of this electrical AD converter is calculated as 500 sps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. PGA can be ensured when operating.
MAX1416EUE+ Features
1 Functions
16 basic kinds of terminations
16 pin count
Minimal supply voltage of 2.7V
3V power supplies
MAX1416EUE+ Applications
There are a lot of Maxim Integrated MAX1416EUE+ ADC applications.
- Industrial Process Control
- Communication Systems
- 4-channel data acquisition
- Broadband data applications
- Imaging Systems
- Communication test equipment
- Music recording
- Cell Phones
- Uninterrupted Power Supplies
- Music reproduction technology
