MAX1448EHJ+T
| Parameters | |
|---|---|
| Reference Type | External, Internal |
| Data Interface | Parallel |
| Sampling Rate | 80 MHz |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 2.7V~3.6V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 80M |
| Output Bit Code | OFFSET BINARY |
| Sample and Hold / Track and Hold | TRACK |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 1V |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1448 |
| Pin Count | 32 |
| JESD-30 Code | S-PQFP-G32 |
| Qualification Status | Not Qualified |
| Configuration | S/H-ADC |
| Number of Bits | 10 |
| Input Type | Differential, Single Ended |
| Architecture | Pipelined |
| Number of Inputs | 1 |
| Converter Type | ADC, PROPRIETARY METHOD |
MAX1448EHJ+T Overview
The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 32-TQFP package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 32 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 1 channels.The is equipped with 32 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, PROPRIETARY METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 80M Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is Pipelined.The supply/analog voltage of this electrical ADC converter is 2.7V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.It belongs to MAX1448 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The supply/digital voltage of this electrical AD converter is 2.7V~3.6V.1 inputs are employed.The maximal analog input voltage of this electrical AD converter is 1V.
MAX1448EHJ+T Features
1 Functions
32 basic kinds of terminations
32 pin count
MAX1448EHJ+T Applications
There are a lot of Maxim Integrated MAX1448EHJ+T ADC applications.
- Communications
- 4-channel data acquisition
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- Industrial Process Control
- High Speed Data Acquisition
- Handheld Terminal Interface
- Digital Multimeters, PLC's (Programming Logic Controllers)
- Wireless local loop
- Audio/Video devices
- Digital signal processing
