MAX14589EEWL+T
| Parameters | |
|---|---|
| Channel-to-Channel Matching (ΔRon) | 5m Ω |
| Crosstalk | -80dB @ 100kHz |
| Voltage - Supply, Single (V+) | 1.6V~5.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 9-WFBGA, WLBGA |
| Number of Pins | 9 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 380mOhm |
| Max Power Dissipation | 963.8mW |
| Base Part Number | MAX14589 |
| Operating Supply Voltage | 2.5V |
| Polarity | Non-Inverting |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.6V |
| Max Supply Current | 60μA |
| Turn On Delay Time | 10 ms |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 2.25 ms |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 380mOhm |
| High Level Output Current | 500mA |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Current - Leakage (IS(off)) (Max) | 400nA |
| Channel Capacitance (CS(off), CD(off)) | 25pF |
| Switch Circuit | DPDT |
| Switch Time (Ton, Toff) (Max) | 10ms, 2.25ms |
MAX14589EEWL+T Overview
As the electronic part is packed in 9-WFBGA, WLBGA, international shipping is convenient. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. 2:2 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. The analog switch ics are built using DPDT switching circuits. 1 circuits are used in this analogue multiplexer. If you are looking for variants of the digital switch, trying search with MAX14589. As far as internal resistance is concerned, it has 380mOhm. To find out what the 9 pins do, please refer to the datasheets. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Analogue multiplexer with a Dual, Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 1.6V. A voltage of 1.6V~5.5V is required to drain this analog switch from a single voltage supply. When the digital multiplexer is charged above 60μA, damage can occur. This electrical part is compatible with 2.5V operating voltages.
MAX14589EEWL+T Features
Switch Circuit: DPDT
-3db Bandwidth: 200MHz
MAX14589EEWL+T Applications
There are a lot of Maxim Integrated MAX14589EEWL+T Analog Switches & Multiplexers ICs applications.
- Frame Relay Equipment
- Switching Systems
- SONET
- Routers
- Private Branch Exchange (PBX)
- Imaging
- Microprocessor Controlled Analog Systems
- Battery Powered Systems
- Ultrasound
- Audio and video switching
