MAX14611ETD+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Feature | Power Supply Decoupling, Thermal-Shutdown Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 1.9512W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | MAX14611 |
| Output Type | Open Drain, Push-Pull, Tri-State |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5V |
| Min Supply Voltage | 900mV |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 1μA |
| Propagation Delay | 40 ns |
| Logic Function | Translator |
| Data Rate | 20Mbps |
| Channel Type | Bidirectional |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.9V~5.5V |
| Voltage - VCCB | 1.65V~5.5V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX14611ETD+T Overview
Level translators is embedded in the 14-WFDFN Exposed Pad package.A package of Tape & Reel (TR) has been used.In its configuration, Open Drain, Push-Pull, Tri-State is used as the output.The translator type of this electrical device is Voltage Level.The electronic part is mounted in a way that corresponds to Surface Mount.The Channel type of this electrical device is Bidirectional.A temperature of -40°C~85°C TA is used for operation.The superior flexibility of the system is achieved through its use of 1 circuits.Transmission lines can be terminated using 14 terminations to end them.There is a base part number MAX14611 that refers to the related parts.There is a voltage supply of 3.3V which powers the device.Level translators has 14 pins.Voltages above 5V are supported.With a minimum supply voltage of 900mV, it operates.From 0.9V~5.5V, the supply rail of the VCCA is configured.In the VCCB, the supply rail is set to 1.65V~5.5V.Channel count is 4.Power Supply Decoupling, Thermal-Shutdown Protection can be ensured when operating.
MAX14611ETD+T Features
14-WFDFN Exposed Pad package
1 circuits
14 pins
MAX14611ETD+T Applications
There are a lot of Maxim Integrated MAX14611ETD+T voltage translators & level shifters applications.
- Personal Electronics
- One Assembly
- Data and Clock Transmission Over Backplane
- I2C / SMBus
- One Assembly and Test Site
- Debouncing a Mechanical Switch
- Controlled Baseline
- Available in Military (-55°C to 125°C)
- Available in Military (–55°C/125°C) Temperature Range
- Public Signage
