banner_page

MAX14752EUE+T

25μs, 2μs 130Ohm Analog Switches BREAK-BEFORE-MAKE MAX14752 20nA 16-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX14752EUE+T
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 674
  • Description: 25μs, 2μs 130Ohm Analog Switches BREAK-BEFORE-MAKE MAX14752 20nA 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2010
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 130Ohm
Terminal Finish MATTE TIN
Max Power Dissipation 890mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 225
Number of Functions 1
Terminal Pitch 0.635mm
Base Part Number MAX14752
Operating Supply Voltage 36V
Number of Channels 8
Number of Circuits 1
Max Supply Voltage 72V
Min Supply Voltage 20V
Operating Supply Current 270μA
Turn On Delay Time 25 μs
Logic Function Multiplexer
Voltage - Supply, Single/Dual (±) 20V~72V ±10V~36V
Supply Type Dual, Single
Supply Current-Max (Isup) 600mA
Turn-Off Delay Time 2 μs
Max Dual Supply Voltage 36V
-3db Bandwidth 20MHz
On-State Resistance (Max) 130Ohm
Min Dual Supply Voltage 10V
Multiplexer/Demultiplexer Circuit 8:1
Current - Leakage (IS(off)) (Max) 20nA
Channel Capacitance (CS(off), CD(off)) 3.7pF
Switch Time (Ton, Toff) (Max) 25μs, 2μs
Charge Injection 200pC
Channel-to-Channel Matching (ΔRon) 500m Ω
Crosstalk -62dB @ 100kHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 25000ns
Radiation Hardening No
RoHS Status ROHS3 Compliant

MAX14752EUE+T Overview


Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. 8:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~85°C TA. In total, 16 terminations have occurred. Due to its 8 channels, the electrical component produces high-quality output. This multiplexer is composed of 1 circuits. Look for analog switch ic variants by searching with MAX14752. In this multiplexer, the internal resistance is 130Ohm. For details about the functions of 16 pins, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 72V to the switch device in normal circumstances. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 20V is the lowest voltage that should be fed to the electronic electronic part. It would be sufficient to run this analogue multiplexer with 270μA current. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 36V. With dual power supplies, you should attach at least 10V. A voltage of 36V can be used to operate the electronic component.

MAX14752EUE+T Features


8 Channels
270μA Supply Current
-3db Bandwidth: 20MHz

MAX14752EUE+T Applications


There are a lot of Maxim Integrated MAX14752EUE+T Analog Switches & Multiplexers ICs applications.

  • Precision instrumentation
  • Intelligent PBX
  • Public switching systems
  • SONET
  • High-Voltage
  • Data switching
  • Microprocessor controlled systems
  • New designs requiring multiplexer functions
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
  • Sample hold systems

Write a review

Note: HTML is not translated!
    Bad           Good