MAX14753EUE+

25μs, 2μs SP4T 130Ohm Analog Switches BREAK-BEFORE-MAKE MAX14753 16 Pins 20nA 35V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX14753EUE+
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 868
Description: 25μs, 2μs SP4T 130Ohm Analog Switches BREAK-BEFORE-MAKE MAX14753 16 Pins 20nA 35V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2008
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	130Ohm
Terminal Finish	TIN
Max Power Dissipation	890mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	35V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX14753
Pin Count	16
Operating Supply Voltage	36V
Number of Channels	8
Number of Circuits	2
Max Supply Voltage	36V
Min Supply Voltage	10V
Operating Supply Current	270μA
Propagation Delay	10 μs
Turn On Delay Time	25 μs
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	20V~72V ±10V~36V
Supply Type	Dual, Single
Bandwidth	20MHz
Supply Current-Max (Isup)	600mA
Neg Supply Voltage-Nom (Vsup)	-35V
Turn-Off Delay Time	2 μs
Max Dual Supply Voltage	36V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	10V
High Level Output Current	100mA
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	3.7pF
On-state Resistance Match-Nom	0.5Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	25μs, 2μs
Charge Injection	200pC
Channel-to-Channel Matching (ΔRon)	500m Ω
Crosstalk	-62dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Max Junction Temperature (Tj)	150°C
Signal Current-Max	0.1A
On-State Resistance	60Ohm
Height	1.1mm
Length	5.1mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant

MAX14753EUE+ Overview

Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tube provides high reliability. Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 4:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 16. Due to its 8 channels, the electrical component produces high-quality output. Powered by a 35V voltage supply, the electrical part should be switched on and run. It is part of the design of the 16 series that this electronic component is included. A SP4T switching circuit is used to build these analog multiplexers. 2 circuits are used in this analogue multiplexer. If you are looking for variants of the digital switch, trying search with MAX14753. The internal resistance of this digital multiplexer is 130Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. In normalcircumstances, users should not exceed 36V volts for the multiplexer. An effective Dual, Single supply digital multiplexer. 10V should be the lowest voltage fed to the electronic component. For this digital switch to work, 270μA current would suffice. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 36V. If you are using dual power supplies, you should attach at least 10V. A voltage of 36V can be used to operate the electronic component. 20MHz bandwidths enable data to be transferred.