MAX14753EUE+T
| Parameters | |
|---|---|
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 130Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 890mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX14753 |
| Operating Supply Voltage | 36V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 72V |
| Min Supply Voltage | 20V |
| Operating Supply Current | 270μA |
| Turn On Delay Time | 25 μs |
| Voltage - Supply, Single/Dual (±) | 20V~72V ±10V~36V |
| Supply Current-Max (Isup) | 600mA |
| Turn-Off Delay Time | 2 μs |
| Max Dual Supply Voltage | 36V |
| -3db Bandwidth | 20MHz |
| On-State Resistance (Max) | 130Ohm |
| Min Dual Supply Voltage | 10V |
| High Level Output Current | 100mA |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 3.7pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 25μs, 2μs |
| Charge Injection | 200pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -62dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.1A |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
MAX14753EUE+T Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 16. As a result of its 8 channels, this electronic component provides high-quality output. Multiplexers built on a SP4T switching circuit are built. The circuits in this analogue multiplexer number 2. Try searching for MAX14753 variants of the analog switch ic. Internally, this switch multiplexer has a resistance of 130Ohm. The datasheets for the 16 pins explain the functions. It is a typical Multiplexer or Switches analog multiplexer. Users shouldn't supply more than 72V voltage to the switch device. There should be 20V voltage fed to the electrical part below 20V. An operating current of 270μA would be sufficient for this switch device. Despite this switch's dual supply capability, its voltage should not exceed 36V. For dual power supplies, a voltage of at least 10V should be attached. 36V operating voltages can be used with this electrical part.
MAX14753EUE+T Features
8 Channels
Switch Circuit: SP4T
270μA Supply Current
-3db Bandwidth: 20MHz
MAX14753EUE+T Applications
There are a lot of Maxim Integrated MAX14753EUE+T Analog Switches & Multiplexers ICs applications.
- SDH/SONET multiplexers
- SDH
- Residential Gateways, Home Gateway/Router
- SONET/SDH ADM
- High speed data transmission line cards
- Communication systems
- DVD-R
- Battery-powered systems
- Digital access cross connects
- Low-Voltage
