MAX14756EUE+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 889mW |
| Technology | BICMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX14756 |
| Output | SEPARATE OUTPUT |
| Operating Supply Voltage | 35V |
| Number of Circuits | 4 |
| Max Supply Voltage | 70V |
| Min Supply Voltage | 10V |
| Analog IC - Other Type | DPDT |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 500μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 60 μs |
| Voltage - Supply, Single/Dual (±) | 10V~70V ±10V~35V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 3 μs |
| Max Dual Supply Voltage | 35V |
| -3db Bandwidth | 145MHz |
| On-State Resistance (Max) | 10Ohm |
| Min Dual Supply Voltage | 10V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 2.5nA |
| Channel Capacitance (CS(off), CD(off)) | 35pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 60μs, 3μs |
| Charge Injection | 580pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -96dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60000ns |
| Normal Position | NC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX14756EUE+T Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. In total, 16 terminations have occurred. Multiplexers built on a SPST - NC switching circuit are built. The circuits in this analogue multiplexer number 4. Try searching with MAX14756 to find analog multiplexer variants. In this multiplexer, the internal resistance is 10Ohm. Please refer to the datasheets for 16 pins functions. It is a typical Multiplexer or Switches analog multiplexer. In normalcircumstances, users should not exceed 70V volts for the multiplexer. Digital switch that provides Dual, Single power at a cost-effective price. A low voltage of 10V should be applied to the electronic component. For this digital switch to work, 500μA current would suffice. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 35V. The voltage should be at least 10V if you are using dual power supplies. With a DPDT analog IC integrated into the board. There are SEPARATE OUTPUT outputs on this analog switch ic. Operating voltages of 35V are compatible with the electrical part.
MAX14756EUE+T Features
Switch Circuit: SPST - NC
500μA Supply Current
-3db Bandwidth: 145MHz
MAX14756EUE+T Applications
There are a lot of Maxim Integrated MAX14756EUE+T Analog Switches & Multiplexers ICs applications.
- T1/E1 Terminals
- Channel Banks
- Battery Powered Instruments
- Microprocessor controlled systems
- Medical
- Video switching
- Sample hold systems
- Digital cross connects (DSX-1)
- Remote wireless modules
- FTTH
