MAX14758EUE+T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 889mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX14758 |
| Output | SEPARATE OUTPUT |
| Operating Supply Voltage | 35V |
| Number of Circuits | 4 |
| Max Supply Voltage | 70V |
| Min Supply Voltage | 10V |
| Analog IC - Other Type | DPDT |
| Nominal Supply Current | 500μA |
| Turn On Delay Time | 60 μs |
| Voltage - Supply, Single/Dual (±) | 10V~70V ±10V~35V |
| Turn-Off Delay Time | 3 μs |
| Max Dual Supply Voltage | 35V |
| -3db Bandwidth | 145MHz |
| On-State Resistance (Max) | 10Ohm |
| Min Dual Supply Voltage | 10V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 2.5nA |
| Channel Capacitance (CS(off), CD(off)) | 35pF |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 60μs, 3μs |
| Charge Injection | 580pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -96dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60000ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX14758EUE+T Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. The multiplexer is located in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. In total, there are 16 terminations. A SPST - NO/NC switching circuit is used for these analog switches. This multiplexer is composed of 4 circuits. Try searching for the analog switch ic with MAX14758 if you are looking for variants. An switch multiplexer with 10Ohm internal resistance has a value of 10Ohm. For details about the functions of 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. In normalcircumstances, users should not exceed 70V volts for the multiplexer. 10V is the lowest voltage the electrical component should receive. For this multiplexer, dual supply voltage is feasible, but it should not exceed 35V. It is recommended that you attach at least 10V to your dual power supply. It is integrated with a DPDT analog IC. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. 35V operating voltages can be used with this electrical part.
MAX14758EUE+T Features
Switch Circuit: SPST - NO/NC
-3db Bandwidth: 145MHz
MAX14758EUE+T Applications
There are a lot of Maxim Integrated MAX14758EUE+T Analog Switches & Multiplexers ICs applications.
- Power routing
- Sample hold systems
- SONET
- New designs requiring multiplexer functions
- Multi-Line E1 Interface Cards
- Cellular phones
- Audio and video signal routing
- Cross Connects
- Automatic test equipment
- USB 1.1 signal switching circuits
