banner_page

MAX14759ETA+

300μs, 1ns SPST - NO 1Ohm DUAL Analog Switches MAX14759 8 Pins 250nA 5V 8-WDFN Exposed Pad


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX14759ETA+
  • Package: 8-WDFN Exposed Pad
  • Datasheet: PDF
  • Stock: 902
  • Description: 300μs, 1ns SPST - NO 1Ohm DUAL Analog Switches MAX14759 8 Pins 250nA 5V 8-WDFN Exposed Pad(Kg)

Details

Tags

Parameters
Number of Circuits 1
Max Supply Voltage 5.5V
Min Supply Voltage 3V
Operating Supply Current 4.1mA
Throw Configuration SPST
Supply Type Single
-3db Bandwidth 100MHz
On-State Resistance (Max) 1Ohm
High Level Output Current 500mA
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 77 dB
Current - Leakage (IS(off)) (Max) 250nA
On-state Resistance Match-Nom 0.0024Ohm
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 300μs, 1ns
Charge Injection 1370pC
Channel-to-Channel Matching (ΔRon) 2.4m Ω
Crosstalk -83dB @ 100kHz
Switch-on Time-Max 300000ns
Voltage - Supply, Single (V+) 3V~5.5V
Length 3mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-WDFN Exposed Pad
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2012
Pbfree Code yes
Part Status Discontinued
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 1Ohm
Max Power Dissipation 1.9512W
Technology BICMOS
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number MAX14759
Pin Count 8
Operating Supply Voltage 5V
Polarity Non-Inverting
Number of Channels 1

MAX14759ETA+ Overview


Shipping overseas is convenient with the electronic component packed in 8-WDFN Exposed Pad. This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~85°C TA. In total, there have been 8 terminations. The electronic part delivers high-quality output through its 1 channels. An 5V voltage supply should allow the electrical part to be turned on and run. There are 8 pins injected into the electronic part body. The analog switch ics are built using SPST - NO switching circuits. A 1 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with MAX14759. An switch multiplexer with 1Ohm internal resistance has a value of 1Ohm. For details about the functions of 8 pins, please refer to the datasheets. Users should never supply a voltage higher than 5.5V to a switch device. A analog switch ic that has a cost-effective Single supply type. A low voltage of 3V should be applied to the electronic component. The analogue multiplexer could operate on 4.1mA current. A voltage of 3V~5.5V is required for this switch device, which drains from a single voltage source. It can operate from 5V operating voltages.

MAX14759ETA+ Features


1 Channels
Switch Circuit: SPST - NO
4.1mA Supply Current
-3db Bandwidth: 100MHz

MAX14759ETA+ Applications


There are a lot of Maxim Integrated MAX14759ETA+ Analog Switches & Multiplexers ICs applications.

  • Audio and video routing
  • Remote Powered Equipment
  • Medical Instrumentation
  • Battery Powered Instruments
  • Relay Replacement
  • USB 1.1 signal switching circuits
  • Digital Cross-Connects
  • Avionics and Military Systems
  • Isolation
  • ADCs such as AD7840/8, AD7870/1/2/4/5/6/8

Write a review

Note: HTML is not translated!
    Bad           Good