MAX14777GTP+T
| Parameters | |
|---|---|
| Technology | BICMOS |
| Terminal Position | QUAD |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX14777 |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 2.2mA |
| Max Supply Current | 1.65mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 40 μs |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 100 μs |
| -3db Bandwidth | 380MHz |
| On-State Resistance (Max) | 10Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 66 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 12pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 40μs, 100μs |
| Charge Injection | 225pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω (Max) |
| Crosstalk | -101dB @ 100kHz |
| Switch-off Time-Max | 10000ns |
| Voltage - Supply, Single (V+) | 3V~5.5V |
| Height Seated (Max) | 0.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 10Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 2.051W |
MAX14777GTP+T Overview
Due to its 20-WFQFN Exposed Pad packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Increasing operating temperature to around -40°C~105°C TA. Totally, there are 20 terminations. By its 1 channels, the electronic component provides high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. A SPST - NO switching circuit is used for these analog switches. 4 circuits are used in this analogue multiplexer. Try searching with MAX14777 to find analog multiplexer variants. There is 10Ohm internal resistance in this digital multiplexer. Please refer to the datasheets for 20 pins functions. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 3V. For this digital switch to work, 2.2mA current would suffice. A voltage of 3V~5.5V is required to drain this analog switch from a single voltage supply. Putting voltage greater than 1.65mA on the multiplexer may cause damage. It comes from the Beyond-the-Rails? series.
MAX14777GTP+T Features
1 Channels
Switch Circuit: SPST - NO
2.2mA Supply Current
-3db Bandwidth: 380MHz
MAX14777GTP+T Applications
There are a lot of Maxim Integrated MAX14777GTP+T Analog Switches & Multiplexers ICs applications.
- PCMCIA cards
- Audio and video signal routing
- Voice over IP/DSL – Integrated Access Devices, Smart
- SDH/SONET multiplexers
- Residential Gateways, Home Gateway/Router
- PBXs
- Precision test equipment
- Mechanical reed relay replacement
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Communication systems
