MAX14778ETP+
| Parameters | |
|---|---|
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 1.5Ohm |
| Max Power Dissipation | 2.6667W |
| Terminal Position | QUAD |
| Base Part Number | MAX14778 |
| Pin Count | 20 |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 4.27mA |
| Nominal Supply Current | 4.27mA |
| Logic Function | Multiplexer |
| Supply Type | Single |
| Bandwidth | 75MHz |
| On-State Resistance (Max) | 1.5Ohm |
| High Level Output Current | 500mA |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 78pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 2ms, 1.5ms |
| Charge Injection | 1720pC |
| Crosstalk | -103dB @ 100kHz |
| Voltage - Supply, Single (V+) | 3V~5.5V |
| Height | 750μm |
| Length | 5.1mm |
| Width | 5.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
MAX14778ETP+ Overview
The electrical component comes in 20-WQFN Exposed Pad packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tube is used. Multiplexers like this are mounted in the Surface Mount position. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -40°C~85°C TA extended. Totally, there are 20 terminations. High-quality output is provided by the electronic component's 1 channels. It is injected into the electrical part body with 20 pins. Based on SP4T switching circuits, these analog multiplexers work. 2 circuits are used in this analogue multiplexer. If you are looking for variants of the digital switch, trying search with MAX14778. A 1.5Ohm internal resistance characterizes this multiplexer. For details about the functions of 20 pins, please refer to the datasheets. A voltage higher than 5.5V should not normally be supplied to the switches. An effective Single supply digital multiplexer. There should be 3V voltage fed to the electrical part below 3V. An operating current of 4.27mA would be sufficient for this switch device. This analog switch requires a voltage of 3V~5.5V to drain from a single voltage supply. 75MHz bandwidths enable data to be transferred.
MAX14778ETP+ Features
1 Channels
Switch Circuit: SP4T
4.27mA Supply Current
Bandwidth: 75MHz
MAX14778ETP+ Applications
There are a lot of Maxim Integrated MAX14778ETP+ Analog Switches & Multiplexers ICs applications.
- Communication systems
- Digital Cross-Connects
- Precision data acquisition
- Access Concentrators
- Avionics
- Avionics and Military Systems
- Industrial and process control systems
- Industrial control systems
- New designs requiring multiplexer functions
- Digital access cross connects
