banner_page

MAX14783EESA+

8 Terminations8 Pin MAX14783 Receivers1 Bits 1/1 Drivers/Receivers1 Functions


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX14783EESA+
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 924
  • Description: 8 Terminations8 Pin MAX14783 Receivers1 Bits 1/1 Drivers/Receivers1 Functions(Kg)

Details

Tags

Parameters
Number of Transceivers 1
ESD Protection Yes
Simplex/Duplex Half Duplex
Transmit Delay-Max 20 ns
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 506.605978mg
Operating Temperature -40°C~85°C
Packaging Tube
Published 2007
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Transceiver
Max Power Dissipation 606mW
Technology BICMOS
Voltage - Supply 3V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 5V
Base Part Number MAX14783
Interface RS-422, RS-485
Operating Supply Current 1.9mA
Propagation Delay 25 ns
Data Rate 42Mbps
Differential Output YES
Protocol RS422, RS485
Input Characteristics DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers 1/1
Driver Number of Bits 1
Receiver Number of Bits 1
Duplex Half
Receiver Hysteresis 10mV

MAX14783EESA+ Overview


Driver ICs with enhanced 8-SOIC (0.154, 3.90mm Width) packages are excellent for driving LEDs with common characteristics.The Tube package contains this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.A differential driver like this uses 3V~5.5V of power.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.Driver ICs with a supply voltage range of 5V can operate efficiently.This integrated circuit has 8 terminations designed for driving and receiving signals from data.For more variants of this part, try searching with the base part number MAX14783, which indicates the product type, temperature, package, etc.An enhanced power dissipation driver IC with 8 pins.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.As a general rule, this receiver has a resolution of 1 bits that is usually specified.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.An input voltage of 1.9mA is recommended for this integrating circuit to be able to drive LEDs.

MAX14783EESA+ Features


Tube package
8 pins

MAX14783EESA+ Applications


There are a lot of Maxim Integrated MAX14783EESA+ Drivers/Receivers/Transceivers applications.

  • VoIP phones
  • Tuner
  • Televisions
  • Changeing the frequency from IF to RF
  • Wireless network systems
  • Transmission stations
  • Wired telephone
  • Fiber optic cable connection network
  • Satellite communications networks
  • Wireless smart house

Write a review

Note: HTML is not translated!
    Bad           Good