MAX14800CCM+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2012 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Resistance | 48Ohm |
| HTS Code | 8542.39.00.01 |
| Subcategory | Multiplexer or Switches |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX14800 |
| Pin Count | 48 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 16 |
| Operating Supply Current | 5μA |
| Throw Configuration | SPST |
| Supply Type | Single |
| -3db Bandwidth | 20MHz |
| On-State Resistance (Max) | 48Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 18pF |
| On-state Resistance Match-Nom | 2.4Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 3.5μs, 3.5μs |
| Charge Injection | 820pC |
| Channel-to-Channel Matching (ΔRon) | 2.4 Ω |
| Crosstalk | -80dB @ 5MHz |
| Switch-on Time-Max | 3500ns |
| Switch-off Time-Max | 3500ns |
| Voltage - Supply, Single (V+) | 2.7V~5.5V |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX14800CCM+ Overview
As the electronic part is packed in 48-LQFP, international shipping is convenient. High reliability is achieved by using advanced packaging method Tray. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 1:1. Around 0°C~70°C TA is the extended operating temperature. In total, there have been 48 terminations. Due to its 1 channels, the electrical component produces high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. 48 pins are injected to the electronic part body. Circuits based on SPST - NO switching are used to construct these analog switch ics. The circuits in this analogue multiplexer number 16. Try searching for MAX14800 variants of the analog switch ic. Analog switches have 48Ohm internal resistance. To find out what the functions of 48 pins are, please refer to their datasheets. This switch device is a typical Multiplexer or Switches. Single supply type digital switch with a low cost. The switch device would be able to operate with 5μA current. This analog switch requires a voltage of 2.7V~5.5V to drain from a single voltage supply.
MAX14800CCM+ Features
1 Channels
Switch Circuit: SPST - NO
5μA Supply Current
-3db Bandwidth: 20MHz
MAX14800CCM+ Applications
There are a lot of Maxim Integrated MAX14800CCM+ Analog Switches & Multiplexers ICs applications.
- Private Branch Exchange (PBX)
- HDTV
- DSUs
- Multi-Line E1 Interface Cards
- Relay Replacement
- Audio signal routing
- Switching Systems
- Digital Cross-Connects
- Cell phones
- Medical
