MAX14803CCM+
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Resistance | 48Ohm |
| Terminal Finish | TIN |
| HTS Code | 8542.39.00.01 |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.818W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX14803 |
| Pin Count | 48 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 16 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Max Supply Current | 500μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 3.5 μs |
| Voltage - Supply, Single/Dual (±) | 40V~250V ±160 |
| Supply Type | Dual, Single |
| Bandwidth | 20MHz |
| Turn-Off Delay Time | 3.5 μs |
| Max Dual Supply Voltage | 160V |
| On-State Resistance (Max) | 48Ohm |
| Min Dual Supply Voltage | 40V |
| Dual Supply Voltage | 100V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 11pF |
| On-state Resistance Match-Nom | 2.4Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 3.5μs, 3.5μs |
| Charge Injection | 820pC |
| Channel-to-Channel Matching (ΔRon) | 2.4 Ω |
| Crosstalk | -80dB @ 5MHz |
| Switch-on Time-Max | 3500ns |
| Switch-off Time-Max | 3500ns |
| Height | 1.45mm |
| Length | 7.1mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Weight | 9.071791g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
MAX14803CCM+ Overview
Shipping overseas is convenient with the electronic component packed in 48-LQFP. To ensure high reliability, a new packaging method Tray is used. Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. The operating temperature is extended to around 0°C~70°C TA. Total terminations are 48. The electronic part provides high-quality output because it has 1 channels. With a 5V voltage supply, the electrical component should be turned on and run. As part of the design of the 48 series, this electronic part has been incorporated into the system. The analog switch ics are built using SPST - NO switching circuits. The multiplexer consists of 16 circuits. MAX14803 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 48Ohm. Please refer to the datasheets for 48 pins functions. In this analog multiplexer, the value is Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 2.7V. Putting voltage greater than 500μA on the multiplexer may cause damage. Despite this switch's dual supply capability, its voltage should not exceed 160V. When using dual power supplies, you should attach at least 40V. A 20MHz-bandwidth can be used for data transfer.
MAX14803CCM+ Features
1 Channels
Switch Circuit: SPST - NO
Bandwidth: 20MHz
MAX14803CCM+ Applications
There are a lot of Maxim Integrated MAX14803CCM+ Analog Switches & Multiplexers ICs applications.
- Industrial and process control systems
- Data switching
- Communication systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Fiber In The Loop (FITL)
- Fiber to the Home
- Central office
- Industrial
- Cellular phones
- Precision test equipment
