MAX14803CCM+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Resistance | 48Ohm |
| Terminal Finish | TIN |
| HTS Code | 8542.39.00.01 |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.818W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 16 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX14803 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Number of Circuits | 16 |
| Nominal Supply Current | 8mA |
| Throw Configuration | SPST |
| Voltage - Supply, Single/Dual (±) | 40V~250V ±160 |
| Supply Type | Single |
| -3db Bandwidth | 20MHz |
| On-State Resistance (Max) | 48Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 11pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 3.5μs, 3.5μs |
| Charge Injection | 820pC |
| Channel-to-Channel Matching (ΔRon) | 2.4 Ω |
| Crosstalk | -80dB @ 5MHz |
| Switch-on Time-Max | 3500ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX14803CCM+T Overview
Presented in 48-LQFP, this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to 0°C~70°C TA. There are 48 terminations totally. A SPST - NO switching circuit is used to build these analog multiplexers. There are 16 circuits in this multiplexer. If you are looking for variants of the digital switch, trying search with MAX14803. There is 48Ohm internal resistance in this digital multiplexer. To find out what the 48 pins do, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Analog switch ics with Single supply type are cost-effective. A voltage of 5.5V can be used to operate the electronic component.
MAX14803CCM+T Features
Switch Circuit: SPST - NO
-3db Bandwidth: 20MHz
MAX14803CCM+T Applications
There are a lot of Maxim Integrated MAX14803CCM+T Analog Switches & Multiplexers ICs applications.
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- DSUs
- Medical Instrumentation
- Voice over IP/DSL – Integrated Access Devices, Smart
- Communications systems
- Communication systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- SDH
- ATM
- Battery Powered Instruments
