MAX1480BEPI+
| Parameters | |
|---|---|
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Tin (Sn) |
| Additional Feature | COMMON I/O; ISOLATED DATA INTERFACE |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 727mW |
| Technology | HYBRID |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1480B |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 35mA |
| Data Rate | 250kbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 70mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 3000 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 3000 ns |
| Height | 5.08mm |
| Length | 37.34mm |
| Width | 14.61mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
MAX1480BEPI+ Overview
With the enhanced 28-DIP (0.600, 15.24mm) package, this driver IC is excellent for driving common LEDs.There is a Tube package for this receiver.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.Ideally, you should place this wide receiver on a Through Hole-type PCB or development board.With respect to the power supply, this differential driver uses 4.5V~5.5V.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.IC receiver has been designed primarily for applications operating at 0°C~70°C.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.Wide receiver has 28 terminations built in for driving or receiving signals from data.This transceiver is packaged with 28 market standard pinoutsSince the base part number MAX1480B uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.Wide receiver with enhanced power dissipation control, 28-pin.This package size decreases dramatically due to optical transceiver downsizing and high-density Through Hole mounting technologies.There is a capability of 1-bit resolution with this ic receiver.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.There are two types of input voltage supply available for this IC, 5V.There is a subcategory called Line Driver or Receivers for this rf transceiver module.It is designed so that it can be operated from a 5V power supply with this driver IC.ICs implement a total of 1 transceivers.Additionally, the optical transceiver module's COMMON I/O; ISOLATED DATA INTERFACE function provides improved signal management accuracy and stability.
MAX1480BEPI+ Features
Tube package
28 pin count
28 pins
5V power supply
MAX1480BEPI+ Applications
There are a lot of Maxim Integrated MAX1480BEPI+ Drivers/Receivers/Transceivers applications.
- Mainframes, workstations or storage devices
- Switching system
- Single fiber bidirectional application
- AV receiver
- LAN, SAN, WAN (local, storage, work area networks)
- Automation systems
- Fiber-to-the-desktop
- Wireless projection application for conferences
- Wireless access points
- Cell phones
