MAX14830ETM+
| Parameters | |
|---|---|
| Technology | CMOS |
| Voltage - Supply | 1.71V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX14830 |
| Pin Count | 48 |
| Power Supplies | 1.82.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4, QUART |
| Memory Size | 128B |
| Operating Supply Current | 500μA |
| Max Supply Current | 500μA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 4MHz |
| Data Rate | 24 Mbps |
| Protocol | RS232, RS485 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Number of Serial I/Os | 4 |
| FIFO's | 128 Byte |
| With Auto Flow Control | Yes |
| Height | 750μm |
| Length | 7.1mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-WFQFN Exposed Pad |
| Number of Pins | 48 |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Internal Oscillator |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
MAX14830ETM+ Overview
Alternatively, UART can be purchased in the cost-effective 48-WFQFN Exposed Pad package.There are 4, QUART channels used for transmission.In terms of packaging, Tube is adopted.The type uPs/uCs/Peripheral ICs is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.In order to configure this device, 48 terminations are used.During operation, it receives a voltage of 2.5V.At present, this electronic part is in the state of Active.As a way to communicate data, the board has 4 serial I/Os.You can mount it by using Surface Mount.1.71V~3.6V supply voltage is required to operate it.In this case, the electronic device is a type of integrated circuit with 48 pins.This IC operates at a clock frequency of 4MHz.In light of numerous similarities, it is included in the subcategory of Serial IO/Communication Controllers.For a long-term satisfactory performance, it is necessary not to exceed the operating temperature of -40°C.The operating temperature should be in excess of 85°C to ensure the normal work for a long time.The configuration of this device is based on the 48 pins.The object possesses some characteristics that are similar to Internal Oscillator.Surface Mount is used for mounting it.When power supplies are provided of 1.82.5/3.3V, it is reliable and efficient for electronic designers.There is a default setting for the base part number of the part to be MAX14830.There is a maximum value for supply current that is 500μA.A supply current of 500μA is appropriate for specific applications.There is 128B of memory that holds various pieces of information.
MAX14830ETM+ Features
4 serial I/Os
Clock frequency of 4MHz
Power supplies of 1.82.5/3.3V
MAX14830ETM+ Applications
There are a lot of Maxim Integrated MAX14830ETM+ UARTs applications.
- Portable Appliances
- GPS Devices
- Network Management
- White goods
- Factory Automation
- Cellular data devices
- Multi serial ports RS-232/RS-422/RS-485 Cards
- Serial to Parallel/Parallel to Serial Converter
- Point-of- Sale Terminals
- Factory Automation and Process Controls
